SolidC UltraPure Centifugal Pump 0 pages

.
kyWhen Higher Purity is the Issue
SolidC UltraPure Centrifugal Pump
SolidC UltraPure
.
Applications
The SolidC UltraPure pump is an efficient and economical centrifugal
pump, which meets the requirements of the pharmaceutical industries.
It provides gentle product treatment and is chemically resistant. SolidC
UltraPure is available in four sizes, SolidC-1 UltraPure, SolidC-2
UltraPure, SolidC-3 UltraPure and SolidC-4 UltraPure.
Standard design
The SolidC UltraPure pump consists of a standard motor, stub shaft,
mechanical compression coupling, adaptor, back plate, impeller, pump
casing and shaft seal and 45° turned pump casing with standard
vertical casing drain ½".
As standard the SolidC UltraPure is delivered with a 45° outlet
(counterclockwise).
45° outlet
The SolidC UltraPure pump is designed for CIP and SIP with emphasis
on large internal roundings and cleanable seals.
SolidC UltraPure is supported on four adjustable legs.
Shaft seals
The SolidC UltraPure pump is equipped with either an external single
or a flushed shaft seal. Both have stationary seal rings in acid-resistant
steel AISI 329 with sealing surface in silicon carbide and rotating seal
rings in silicon carbide. The secondary seal of the flushed seal is a
long lasting lip seal.
Materials
Product wetted steel parts: . . . . . . . . .Acid-resistant steel 1.4404
(316L) with material
traceability EN.10204.3.1
Other steel parts: . . . . . . . . . . . . . . .Stainless steel 1.4301 (304).
Product wetted seals: . . . . . . . . . . . .EPDM USP class 6.
Finish: . . . . . . . . . . . . . . . . . . . . . .Bright (Ra 0.5).
Technical data
Max. inlet pressure: . . . . . . . . . . . . .400 kPa (4 bar).
Temperature range: . . . . . . . . . . . . . .-10°C to +120°C (EPDM).
Flushed shaft seal (FSS):
Water pressure inlet: . . . . . . . . . . . . .max. 100 kpa (1 bar).
Water consumption: . . . . . . . . . . . . .0.25 -0.5 l/min.
Connections for FSS:
R 1/8" (BSP) external thread.
Motor
Foot-flanged motor according to the IEC metric standard (EFF II), 2
poles = 3000/3600 rpm. at 50/60 Hz, IP 55 (with drain hole with
labyrinth plug), insulation class F.
Voltage and frequency
3 ~, 50 Hz, 220-240V Ä/380-420VY 4 kW
3 ~, 60 Hz, 250-280V Ä/440-480VY 4.6 kW
3 ~, 50 Hz, 380-420V Ä/660-690VY 5.5 kW
3 ~, 60 Hz, 440-480VÄ 6.4 kW
Motor sizes
50 Hz:1.1, 1.5, 2.2, 3, 4, 5.5, 7.5, 11, 15, 18.5, 22 kW
60 Hz:1.3, 1.75, 2.5, 3.5, 4.6, 6.4, 8.6, 12.5, 17, 21, 25 kW.
NOTE!
When used with frequency converter the 22 kW motor only has 20
kW effect.
Warranty
Extended 3-years warranty on the SolidC UltraPure Centrifugal Pump
range. The warranty covers all non wear parts on the condition that
genuine Alfa Laval Spare Parts are used.