عضویت 
ورود اعضا
راهنمای خرید
FT-210 Series Turbine Flow Sensor0 pages
FT-210 Series – TurboFlow®
Low Flow Turbine Sensor
Low Flow Rates .1 to 2.5 LPM and High Accuracy ±3% of Reading
Lightweight Turbine Ensures Fast Startup
Mounts In Any Orientation
Gems FT-210 features proven turbine technology in a small package for low flow
applications. The turbine technology provides a highly repeatable sensor ideally suited
for measurement of either volume dispensing and/or flow rate applications. The small
turbine reacts quickly to on/off dispensing applications. Each sensor is 100% tested,
ensuring years of service life.
(+)
5-24Vdc
(-)
O Vdc
Ro H S
3k-30k Ohms
CUSTOMER
SUPPLIED
G
EM
®
S CO PLIAN
M
T
Ro H S
G
Specifications
EM
®
S CO PLIAN
M
T
OUTPUT
FLOW SENSORS – ELECTRONIC
Wetted Materials
Body
Turbine
Bearings
Operating Pressure
Burst Pressure
Flow Range
t
t
Pulses
t
t
Frequency Output
Operating Temperature
Viscosity
Filtert
Input Power
Output (Hz)
t
Accuracy
Repeatability
Electrical Connection
Inlet/Outlet Ports
Nylon 12 (Grilamid TR55)
Nylon 12 Composite
PTFE/15% Graphite
350 PSI (24 bar)
1400 PSI (97 bar)
.026-.65 gallons/minute
0.1-2.5 liters/minute
3.4-84.5 ounces/minute
83,200 per gallon
22,000 per liter
650 per ounce
36.6-917 Hz
-4°F to 212°F (-20°C to 100°C)
32 to 70 SSU (.8 to 16 Centistokes)
<50 Microns
5 to 24 VDC
NPN Sinking Open Collector @ 20mA Maximum Leakage
Current 10μA (3K-30K Pull up resistor required)
±3% of Reading
0.5% of Full Scale
9.4mm Spacing 3-pole DIN Connector (1˝ high)
1/4˝ NPT (1/4˝ G Male also available)
How To Order
Dimensions
1.11˝
(28.2 mm)
.43˝
(11.0 mm)
1/4˝ NPT
OR
1/4˝ G
1.77˝
(45.0 mm)
Wiring
(+)
(-)
5-24Vdc
O Vdc
3k-30k Ohms
CUSTOMER
SUPPLIED
OUTPUT
Pin Code: 1 = Output
2 = Supply
4 = Common
.83˝
.11˝
Specify a Part Number for the Port Connection AND a Part Number for the DIN
Electrical Connection. Two Part Numbers are required for a complete part assembly.
.67˝
(17.0 mm)
.83˝
(21.2 mm)
.11˝
(2.8 mm)
(21.2
(2.8 mm)
For Mating DIN Connector – mm) 212404
P/N
Function
DIN Termination
V+
FT-210 Sensor
.67˝
(17.0 mm)
1.11˝
(28.2 mm)
1
–
Body Material
Port Size
Part Number
1/4˝ NPT
212460
2
.43˝
(11.0 mm)
212465
1/4˝ G
Nylon 12
Output
1/4˝ NPT
OR
1/4˝ G
Pressure 1.77˝
Drop—Typical
(45.0 mm)
–
Stock Items.
Electrical Connection
0.13
400
GPM
0.26
0.40
0.53
0.66
∆ P MBAR
3.6
200
2.9
150
2.2
1.5
0.7
PSI
212404
4.4
250
50
218572
5.0
300
Part Number
1 meter DIN PVC Cable Assembly with 10K pull-up resistor
Mating DIN Connector
350
100
Description
0
0
0.5
1
1.5
2
2.5
3
FLOW RATE - L/MIN
F-10
Visit www.GemsSensors.com for most current information.
FT-210 Series / p1of1 / 30-JUL-14
"
