KP 070 pages

WENKING POTENTIOSTAT KP 07
The compact potentiostat KP 07 is a very economic instrument for simple potentiostatic and
galvanostatic operations, preferentially where high currents and low cell voltages are required.
Four operation modes are available: open circuit potential (OCP) measurement, potentiostatic
control, controlled cell voltage, and galvanostatic control. It can be used as stand-alone device
using its internal control voltage source (+/- 5000 mV), or a control voltage from an external
source. Potential and current are displayed on two LCD displays and can be read out at two
monitor outputs. The compact housing, small as a book, is made of a strong aluminium profile,
acting as heat sink for the internal circuits. Therefore, the KP07 withstands harsh environmental
conditions.

The KP07 got 4 current ranges from 20 mA to 20 A. The potential display can be switched from
high resolution (+/- 1999 mV) to high potential/high voltage (+/- 19.99 V).
The KP07 can be controlled manually, or from a personal computer when using an AD/DA
interface. An interface socket on the rear panel feed all analogue and digital signals.

Maximum CE Voltage ± 8 V
Maximum Current
± 3.5 A
4 - Wire Cell Connection
Main applications for the KP07 are battery research and testing, fuel cells, galvanics, andoc and
cathodic protection.