ELECTROCHEMICAL FLOW CELL DN-FC0 pages
ELECTROCHEMICAL
FLOW CELL DN-FC
Besides rortating disks, flow cells are a means
to operate electrodes at controlled laminar flow.
Since the counter electrode is placed in parallel
and opposite close to the working electrode,
appreciable currents can be achieved. So, flow
cells play their strength best when used for
galvanic deposition experiments.
Fig. 1: Test loop with DN-FC. Design flow rate up to 10 m/s,
operating limit 120 °C.
On the other hand, laminar flow along a surface
is the typical model for a flow in tubes.
Corrosion in flow systems therefore can be well
characterised by using flow cells.
One essential of flow cells is the absence of
edges causing turbulence. DN-FC strictly obeys
the rules for laminar flow channels. In addition,
both working electrode and counter electrode fit
smooth in the channel surface due to the
adjustable plug-in.
The DN-FC can be manufactured from perspex
glass, PVC, PVDF, PTFE or even PFA,
depending on the environmental demands.
Bank Elektronik- Intelligent Controls supplies
all necessary parts for complete test loops,
including pukps, heat exchangers, flow meters
and controls.
Upper: DN-FC, mounted
Left: Working electrode of DN-FC, 24 mm dia
Bank Elektronik - Intelligent Controls GmbH
Giessener Strasse 60 D - 35415 Pohlheim
Phone (+49)-6403-609860 Fax -6098622 E-mail info@bank-ic.de
INTELLIGENT CONTROLS
"