Hot-Melt Adhesive Spray System TR 80 LCD0 pages

Reka Glue Guns Pneumatic

Fig. TR 80 LCD

Made in Germany

The TR 80 LCD Cartridge Hot-Spray-System consists of the TR 80 LCD Cartridge gun and the
stand with pressure regulator and manometer.
The TR 80 LCD is a hot-melt adhesive spray system.
Spray application is a non-contact glue application,
which means it goes easy on the materials that are
about to be glued. Also, spray application allows
covering great areas and using very little glue.
A stand for storing with built in pressure regulator and
manometer is part of the system and permanently
attached to the glue gun TR 80 LCD, so setting the
right glue output and spray pattern becomes very
easy.
The hot-melt adhesive is extruded through air
pressure. Pneumatic glue guns increase work speed
and simplify exact dosing of the glue.
Thanks to the built in electronic temperature
regulation, the glue gun is ready to work within 3 - 10
minutes. Further more, it keeps the temperature on a
constant level thus is a perfect suit for processing
temperature-sensitive hot-melt glue.

A LCD-display and push-buttons allow a precise
temperature adjustment. This way, the user always
knows the current temperature of the glue
applicator and is able to apply the glue at the
intended temperature.
The spray applicator uses 310 ml aluminium hotmelt glue cartridges, which for instance can contain
PUR-hot-melt adhesive or POR-hot-melt glue. The
cartridges can be swapped easy and hassle-free.
The optional cartridge pre-heater KVG heats up the
glue before use and increases the possible glue
output per hour.
A cartridge glue gun in combination with empty
cartridges lets you test and process different hotmelts within a short period of time. This is
especially useful for working in laboratories or
when qualifying a new hot-melt adhesive for a big
production line.

Subject to modifications

Hot-Melt Adhesive Spray System TR 80 LCD