TR 60 LCD0 pages
Reka Glue Guns Pneumatic
Fig. TR 60 LCD
Made in Germany
Subject to modifications
Hot-Melt Adhesive Spray System TR 60 LCD
The TR 60 LCD Hot-Spray-System consists of the TR 60 LCD glue gun and the stand on which the
gun may be deposited.
The TR 60 LCD is a hot-melt adhesive spray system.
Spray application is a non-contact glue application,
which means it goes easy on the materials that are
about to be glued. Also, spray application allows
covering great areas and using very little glue.
A stand for storing with built in pressure regulator and
manometer is part of the system and permanently
attached to the TR 60 LCD, so setting the right glue
output and spray pattern becomes very easy.
The hot-melt adhesive is extruded through air
pressure. Pneumatic glue guns increase work speed
and simplify exact dosing of the glue. Thanks to the
built in electronic temperature regulation the glue gun
is ready to work within 3 to 10 minutes. Further more, it
keeps the temperature on a constant level thus is a
perfect suit for processing temperature-sensitive hotmelt glue.
A LCD-display and push-buttons allow a precise
temperature adjustment. This way, the user always
knows the current temperature of the glue applicator
and is able to apply the glue at the intended
temperature.
The TR 60 LCD hot-melt glue gun can be loaded with
granulate, pillows and 43 mm slugs. It offers maximum
flexibility for choosing the right glue and lets you benefit
from cost-advantages of different shapes of hot-melt.
The capacity of 250 ml is sufficient for numerous
gluings.
The TR 60 LCD can be switched to dot- and lineapplication with an adapter.
The number of possible application patterns is widely
extended by the Reka nozzle range. Almost all of the
offered nozzles can be used with every Reka glue gun
in combination with a separate adapter.