EGX-600/4000 pages
Benchtop Engravers EGX-600/400 SPECIFICATIONS
EGX-600
EGX-400
Table slzs | 610 (W) x4Q7 (D) mm {24 (W) x 16 (D) In.) | 407 (W) x305 {D) mm (16 (W) x 12 (D) In.) |
Cutting area | 610 (X) x 407 (Y) x 42.5 (Z) mm (24 (X) x 16 (Y) x 1-5/8 (Z) in.) | 407 (X) x305 (Y) X42.5 (Z) mm (16 (X) x 12 (Y) x 1-5/8 (Z) in.) |
Loadable workplace thickness | Maximum 40 mm (1-9/16 In.) | |
XYZ-axIs motor | AC servo motors (DAC-FFP), 3-axls simultaneous control | |
Feed rate | XY-axis: 0.5, 1 to 100 mm/s (0.02 in./s, 0.039 to 3.9 inJs) Z-axis: 0.5, 1 to 50 mm/s {0.02 \nJs, 0.039 to 1.9 inJs) | |
Acceleration | ||
Software resolution | 0,01 mm/step (0.00039 in./step) | |
Mechanical resolution | XYaxls: 0.003 mm/step (0.00012 InJstep) Z-axis: 0.0025 mm/step (0.000098 InJstep) | |
Spindle motor | Brush less DC motor, Maximum 72 W | |
Spindle speed | ||
Tool chuck | Cutter holder {4.36 mm) and collet | |
Positioning Accuracy | ±0.1 % of distance traveled or ± 0.1 mm (± 0.004 In.), whichever Is greater (no-load operation) | |
Repeatability | 0.05 mm (0.002 in.) or less |
Interface Parallel connector {Centronics-compliant), serial connector (RS-232C-compllant), Memory card slot (Compliance with Multi Media Card), expansion connector 1, expansion connector 2 | ||
Buffer memory | 2MB (replot buffer: 1.9MB) | |
Instruction system | ||
Power supply | AC 117 V, 230 V, 240 V ± 10 %, 50/60 Hz | |
Power consumption | ||
Acoustic noise level | No-load operation: 75 dB (A) or less standby: 45 dB (A) or less (According to ISO 7779) | |
Dimensions (main unit) | 995 (W) x 820 (D) x521 (H) mm (39-3/16 (W) x 32-5/16 (D) x 20-1/2 (H) in.) | 795 (W) x 719 (D) x 521 (H) mm (31-5/16 (W) x 28-5/16 {D) x 20-1/2 (H) in.) |
Weight (main unit) | 64 kg {141 lb,) | 51 kg (112 lb.) |
Operating environment | Temperature: 5 to 40°C (41 to 104 °F) | Humidity: 35 to 80 % (no condensation) |
Accessories | Operation panel, Operation-panel connector cable, Power cord, Depth regulator nose unit, Solid collet, Solid collet for diamond scrapers, Clamps, Wrenches {17mm, 10mm), Hexagonal screw driver, Hexagonal wrench, USB to RS-232C converter cable, Roland Software Package CD-ROM, User's Manual |
I OPTIONS
Item | Model number | Description |
Engraving cutters (for plastic) | ZEC-A4013 | Cemented carbide dia. = 4.36 x 165 (L) x 0.127 (W) |
ZEC-A4025 | Cemented carbide dia. = 4.36 x 165 (L) x 0.254 (W) | |
ZEC-A4051 | Cemented carbide dia. = 4.36 x 165 (L) x 0.508 (W) | |
ZEC-A4076 | Cemented carbide dia. = 4.36 x 165 (L) x 0.762 (W) | |
Engraving cutters (for aluminum or brass) | ZEC-A4013-BAL | Cemented carbide dia. = 4.36 x 165 (L) x 0,13 (W) |
ZEC-A402S-BAL | Cemented carbide dia. = 4.36 x 165 (L) x 0.25 (W) | |
Parallel engraving cutters (for plastic) | ZEC-A4150 | Cemented carbide dia. = 4.36 x 165 (L) x 1,52 (W) |
ZEC-A4190 | Cemented carbide dia. = 4.36 x 165 (L) x 1.91 (W) | |
ZEC-A4230 | Cemented carbide dia. = 4.36 x 165 (L) x 2.29 (W) | |
ZEC-A4320 | Cemented carbide dia. = 4.36 x 165 (L) x 3.175 (W) | |
ZEC-A4380 | Cemented carbide dia. = 4.36 x 165 (L) x 3.81 (W) | |
ZEC-A4430 | Cemented carbide dia. = 4.36 x 165 (L) x 4.34 (W) |
Item | Model number | Description |
Collets for end-mill | ZC-23 | Diameter 6 mm, 5 mm, 4 mm, and 3 mm collets: 1 pc. each |
ZC-23-3 | Diameter 3 mm collet: 1 pc. | |
ZC-23-4 | Diameter 4 mm collet: 1 pc. | |
ZC-23-6 | Diameter 6 mm collet: 1 pc. | |
ZC-23-3175 | Diameter 3-175 mm collet: 1 pc | |
ZC-23-6.35 | Diameter 6.35 mm collet: 1 pc | |
Collet for ZDC-A4000 | ZC-E436 | Diameter 4.36 mm collet: 1 pc |
Nose cone | ZDN-200 | Inner dia meter 2 mm, outer diameter 4,2 mm, for eng raving text |
Spindle unit | ZS-600 | |
Vacuum adapter | ZAD-600 | |
Adhesive sheet for securing material | AS-10 | 210 mm x 140 mm (8-1/4 in. x 5-1/2 in.), 10 sheets |
dia - shank diameter, L ■ overall length, W - blade width, unit - mm
Item | Model number | Description |
Diamond engraving cutters | ZDC-A4000 | Diamond dia. = 4.36 x 178 (L), only operates with the ZC-E436 collet |
Square end-mill | ZHS-100 | High speed steel dia. = 1 3 (?) x 6 (d) x 50 (L) x 2NT |
ZHS-200 | High speed steel dia. = 2 6 (£) x 6 (d) x 50 (L) x 2NT | |
ZHS-300 | High speed steel dia. = 3 10 U) x 6 (d) x 50 (L) x 2NT | |
ZHS-400 | High speed steel dia. =4 12 (£) x 6 (d) x 50 (L) x 2NT | |
ZHS-500 | High speed steel dia. = 5 15 fe) x 6 (d) x 55 (L) x 2NT | |
ZHS-600 | High speed steel dia, =6 15(i)x6(d)x55(L)x2MT | |
Ball end-mill | ZCB-150 | Cemented carbide R1.5 25 (e) x 2A (Le) x 65 03 x 6 (d) x 2NT |
ZCB-200 | Cemented carbide R2 25(*)x3.2(Lc)x70(L)x6(d)x2m- | |
ZCB-300 | Cemented carbide R3 30 (4) x 4.8 (Lt) x80 (L) x E (d) x 2MT |
dia = flute
L = overall
diameter, R = flute radius, 1= flute length. Lc = blade length,
length, d = shank diameter, NT = number of flute, unit = mm
Roland reserves the right to make changes in specifications, materials or accessories without notice. Your actual output may vary. For optimum output quality, periodic maintenance to critical components may be required. Please contact your Roland
dealer tor details. No guarantee or warranty Is Implied other than expressly stated. Roland shall not be liable for any Incidental or consequential damages, whether foreseeable or not, caused by defects In such products.
Reproduction or use ol copyrighted material Is governed by local, national, and International laws. Customers are responsible for observing all applicable laws and are liable for any Infringement.
All trademarks are the properly ol their respective owners. Roland DG Corp. has licensed the MMP technology from the TPL Group.
Roland
AUTHORIZED DEALER:
Printed in Japan. RDG-90196 14 MAY H-2 C-S
www.rolanddg.com
Imagine.
B Roland0
Benchtop Engravers
Model: EGX-600/400
"