VersaCAMM VS-640i/540i/300i0 pages
vs-s40i / VS-5401 / vs-aoai
Model | VS-640i VS-540i VS-300i | |||
Printing technology | Piezoelectric Inkjet | |||
Media | Width | 210 to 1,625 mm (8.3 to 64 in.) | 210 to 1,371 mm (8.3 to 54 in.) | 182 to 762 mm (7.2 to 30 in.) | ||
Thickness | Maximum 1.0 mm [39 mil) with liner, for printing Maximum 0.4 mm [16 mil) with liner and 0.22 mm (9 mil] without liner, for cutting | |||
Roll outer diameter | Maximum 210 mm (B.3 in.) | |||
Roll weight | Max. 40 kg (88 lbs) | Max. 30 kg (66 lbs] | Max. 25 kg (55 lbs) | |||
Core diameter*1 | 76.2 mm [3 in.) or 50.8 mm [2 in.] | |||
Printing/cutting width*2 | Max. 1,600 mm [63 in.) | Max. 1,346 mm [53 in.) | Max. 736 mm (29 in.) | |||
Ink cartridges | Types | 440-cc cartridge [cyan, magenta, yellow, black, light cyan, light magenta, and light black] 220-cc cartridge (metallic silver and white) | ||
Colors | Eight colors [cyan, magenta, yellow, black, light cyan, light magenta, light black, and white) or. Eight colors [cyan, magenta, yellow, black, light cyan, light magenta, light black, and metallic silver] or. Eight colors [cyan, magenta, yellow, black, light cyan, light magenta, metallic silver, and white) or, Seven colors [cyan, magenta, yellow, black, light cyan, light magenta, and light black] or. Four colors (cyan, magenta, yellow, and black) | |||
Printing resolution (dots per inch) | Maximum 1,440 dpi | |||
Cutting speed | 10 to 300 mm/s | |||
Blade force | 30 to 300 gf | |||
Cutting blade | Type: Roland CAMM-1 series compatible Blade offset: 0.000 to 1.500 mm [0.000 to 0.059 in) | |||
Software resolution (when cutting] | 0.025 mm/step | |||
Distance accuracy (when printing) *3** | Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater | |||
Distance accuracy [when cutting] *3 | Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is greater When distance correction has been performed (when the setting for [CUTTING MENU] - [CALIBRATION] hos bssn iriodoji Error of loss tfton ±0.2% of distorted travslsd, or ±0.1 mmr whichsvor is Qrscitsr | |||
Repeatability (when cutting)*3*5 | ±0.1 mm or less | |||
Alignment accuracy for printing and cutting*3 *6 | ±0.6 mm or less | |||
Alignment accuracy for printing and cutting when reloading media *3*7 | Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is greater | |||
Media heating system*8 | Print heater | Setting range for the preset temperature: 30 to 45°C (86 to 112°F) | ||
Dryer | Setting range for the preset temperature: 30 to 50°C (86 to 122°F) | |||
Connectivity | Ethernet (10BASE-T/100BASE-TX, automatic switching} | |||
Power-saving function | Automatic sleep feature | |||
Power requirements | AC100lol20V±10%,7.8A,50/60Hzor AC 220 to 240 V ± 1 <K, 4.0 A, 50/60 Hz | AC100tol20V±10%,7jA,50/«IHzor AC 220 to 240 V±10%, 3.8 A, 50/60 Hz | AC 100lol20V±10%,5.1 A, 50/60 Hz or AC 220 to 240 V±10%, 2.6 A 50/60 Hz | |
Power | During operation | Approx. 1,044 W | Approx. 995 W | Approx. 670 W |
Sleep mode | Approx. 14.5 W | Approx. 15.1 W | Approx. 14.4 W | |
Acoustic noise level | During operation: 69 dB (A) or less During standby: 43 dB (A) or less | |||
Dimensions (with stand) | 2,575 (W) x 795 P| xl ,270 |H| mm (101.4 (W)x31.1 (D]x50|H]in.| | 2,315(W)x795(D)xl,270(H]mm (91.1 |W)x31.1 |D)x50|H)in.) | 1,700 (W) x 795 (D| x 1,270 (H) mm |66.9(W]x31.1 (D)x50|H)in.| | |
Weight (with stand) | 140 kg (309 lbs) | 130kg(287lbs| | 100 kg (220 lbs) | |
Environmental | Power on | Temperature: 15 to 32°C (59 to 90°F) (20°C [68°F] or more recommended), humidity: 35 to 80%RH (norKxxtdensing) | ||
Power off | Temperature: 5 to40°C (41 to 104°F), humidity: 20 to 80%RH (noncondensing) | |||
Included items | Exclusive stands, power cord, blade, blade holder, media clamps, media holder, replacement blade for separating knife, User's Manual, etc. |
Mobfttetwj £ Roland \fersaV\forks-
Model | Description | |
ECO-SOL MAX2 Ink | ES14-4CY | Cyan, 440cc |
ESL4-4MG | Magenta, 440cc | |
ES14.4YE | Yellow, 440cc | |
ESL4-4BK | Black, 440cc | |
ESL4-4LC | Light cyan, 440cc | |
ESL4-4LM | Light magenta, 440cc | |
ESL4-4LK | Light black, 440cc | |
ESL4-MT | Metallic silver, 220cc | |
ESL4-WH | White, 220cc | |
Cleaning cartridge | ESL4-CL | Cleaning liquid, lpc. |
Blades | ZEC-U5025 | For thick, reflective and fluorescent vinyl, as well as sign vinyl in general, 5pcs. |
ZEC-U5022 | For sign vinyl in general, 2pcs. | |
Blade Holders | XD-CH2 | Blade holder with blade extension adjuster, made of aluminum |
XD-CH3 | Blade holder with blade extension adjuster, made of resin |
Roland VersaWorks System Requirements
Operating system | Windows® 7 Professional or Ultimate (32/64-bit); Windows Vista" Business/Ultimate (32/64-bit); Windows8 XP Professional Service Pack 2 or later (32/64fcit) |
CPU | Core™2 Duo, 2.0 GHz or faster recommended |
RAM | 2 GB or more recommended |
Video card and monitor | A resolution of 1,280 x 1,024 or more recommended |
Free hard-disk space | 40 GB or more recommended |
Hard-disk file system | NTFS format |
Optical drive | DVD-ROM drive |
*Roland VersaWorks® is a 32-bit application, which runs on 64-bit Windows® with WoW64 (Windows 32-bit on
Windows 64-bit].
TU2-64 [ForVSo40i]
TU2-54 [ForVS-540i]
TU2-30 [For VS300i] * Rolls up to 30kg (66 lbs.]
Heater and blower
OndS 640A/B [ForVS-640i] *lt is recommended to use
OndS 540A/B [For VS-5401] ^X^ting with
OndS 300A/B [ForVS-300i] white and metallic.
Power requirements
OndS ***A : ACIOOv to 115V, 6A, 50/60Hz
OndS ***B : AC200v to 240V, 3A, 50/60Hz_
* 1 Note: The media holder of this machine is exclusive use for the media of paper tube (core) inner diameter 3 inches. To use 2 inches media, the optional media flanges are required. *2 The length of printing or cutting
is subject to the limitations of the program. *3 'Media type: Media specified by Roland DG Corp. 'Temperature: 25°C (77°F), humidity: 50% 'Roll media must be loaded correctly. 'Applicable when all pinch rollers
available to the media width are used. 'Side margins: 25 mm or more for both the left and right margins -Front margin: 35 mm or more -Excluding expansion/contraction of the media -Not assured when the print heater
or dryer is used. -All correction or adjustment function of this machine has been made properly. *4 With Roland PET film, print travel: 1 m *5 [PREFEED] menu item must be set to "ENABLE.1 Range for assured repetition
accuracy [64-inch model] -For media with a width exceeding 610 mm: Length 4,000 mm -For media with a width of 610 mm or less: Length 8,000 mm [54inch model] -For media with a width exceeding 610 mm:
Length 4,000 mm 'For media with a width of 610 mm or less: Length 8,000 mm [30-inch model] 'Length 3,000 mm *6 'Provided that media length is under 3,000 mm -Excludes the effects of slanted movement and
of expansion and contraction of me media. *7 Data size [64-inch model] 1,000 mm in the media-feed direction, 1,600 mm in the carriage-movement direction [54-inch model] 1,000 mm in the media-feed direction,
1,346 mm in the carriage-movement direction [30-inch model] 1,000 mm in the mediofeed direction, 736 mm in the carriage-movement direction -No lamination -Automatic detection of crop marks at 4 points when
media is reloaded. -During cutting, [PREFEED] menu item must be set to "ENABLE." -Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media. *8 'Warm-up is required after
power up. This may require 5 to 20 minutes, depending on the operating environment. 'Depending on the ambient temperature and media width, the preset temperature may fail lo be reached.
imagine.
Roland
Digital Value Engineering
Prints. Cut VS-B40i / VS-S40i / VS-300i
About Metallic Silver and White Inks
Due to the nature of white and silver inks, the pigment in these inks will settle in the cartridge and ink flow system, requiring you to shake the cartridge before
each use. Outdoor durability is three years for CMYK inks, one year for white ink, and one to three years for metallic silver ink, depending on the media
used. Roland strongly recommends lamination for both indoor and outdoor graphics to ensure the quality of metallic inks.
Roland DG products that feature this environmental label meet the company's criteria for environmental
consciousness, a set of standards based on ISO 14021 self-declaration type II. For more information, please visit
www.rolanddg.com.
ECO
Roland reserves the right to make changes in specifications, materials or accessories without notice. Your actual output may vary. For optimum output quality, periodic maintenance to critical components may be required. Please contact your Roland dealer for details. No guarantee or warranty is implied other than expressly stated.
Roland shall not be liable for any incidental or consequential damages, whether foreseeable or not, caused by defects in such products. Adobe, PostScript, PostScript 3 and the PostScript logo are trademarks of Adobe Systems Incorporated. PANTONE® is the property of Pantone LLC. All other trademarks are the property of their
respective owners. Reproduction or use of copyrighted material is governed by local, national, and international laws. Customers are responsible for observing all applicable laws and are liable for any infringement. Roland DG Corp. has licensed the MMP technology from the TPL Group.
Roland
AUTHORIZED DEALER:
Printed in Japan. RDG-41609799913 SEP H-3 D-S
www.rolanddg.com
"