عضویت 
ورود اعضا
راهنمای خرید
inline valve0 pages
(¡¡NORGREN
nnnn030, X30, X33 (SUPER X)
nnnn3/2, 5/2 and 5/3 manual and mechanical actuated spool valves
nnnn1/8", 06 mm PIF&1M"
nnnnWide range of operators
nnnnSuitable for multi-directional flow
nnnnand dual supply applications
nnnnHigh flow capacity
nnnnTN ♦'TU'* /T
nnnnTechnical features
nnnnMedium:
nnnnCompressed air, filtered
nnnn.ubncated and non-lubncatec
nnnnOperation:
nnnnSpoolvalve, directly anc
nnnnndirectly actuatec
nnnnPorts:
nnnn1/8", 0 6 mm PIF (available or
nnnnthe PA range only) and 1/4"
nnnnOperating pressure:
nnnnMax. 10 bar
nnnnFlOW:
nnnnSize l/min Cv Kv
nnnn1/8" 335 0,34 0,295
nnnn1/4" 965 0,98 0,35'
nnnnAmbient temperature:
nnnn0 ... +70°C
nnnnAirsupply must be dryenough
nnnnto avoid ice formation at
nnnntemperatures below+2°C
nnnnMounting:
nnnnThrough-holes in valve body
nnnn3/2 way PA body valves
nnnnMetalversions are available on request
nnnnPort assembly torque:
nnnnJse recommended torque for fittings
nnnnThis should not exceed 10 Nm, otherwise
nnnndamage mayoccurto body.
nnnnPIF Ports:
nnnnThe PIF fittings are suitable for Nylon 1 '
nnnnor 12, polyurethane [92 to 98 shore] anc
nnnnother plasticised or unplasticised tubine
nnnnwhich conforms to the tolerances
nnnnspecified m BS5409, Part 1,1976, light
nnnnand normal duty, DIN 73378, DIN74234
nnnnMFE 49-100. Tube is to be cut square anc
nnnnfree of burrs.
nnnnMaterials
nnnnPlastic version for 3/2
nnnnway valves only
nnnn3odyand end cover: PA6
nnnnOperators: Aluminium
nnnnsteel, plastic etc
nnnnSeals: nitnle rubber
nnnnMetal version
nnnn3ody: diecast zinc
nnnnFnd cover: aluminium
nnnnor glass-filled nylor
nnnnOperators: Aluminium
nnnnsteel, plastic etc
nnnnSeals: nitrite rubber
nnnn1/11
nnnnOur policy is one of continued research and development. We therefore reserve the right to amend,
nnnnwithout notice, the specifications given in this document.
nnnnN/en 5.3.560.01
"
