flush diaphragm pressure transmitter M6420-920 pages
Product Data Sheet DS2701
nnPRESSURE M6420-92 Flush Mounted Transmitter nnThe M6420-92 is ideal for applications where thesensing element has to be in direct contact with the
media.This enables measurement of medias that
contain particles or are liable to congeal.
Pressure Ranges 1,2,3,5,10,20 & 50 bar gauge or absolute.Other ranges available Excitation 10-32Vdc unregulated Output Span 16mA 1% >
nnDESCRIPTION
Output Zero 4mA ѱ1% of span Non Linearity,Hysteresis &Repeatability (NLH) <0.25% span (best fit straight line) >
nnThe M6420-92 pressure transmitter is based on a four
active arm strain gauge bridge fused to a high purity
ceramic diaphragm,offering high natural output
coupled with superb chemical and corrosion
resistance.It has a two wire,4-20mA output
proportional to pressure and is fully CE compliant.
The sensing element and its associated electronics
are housed in a rugged stainless steel case.It has a
M24 x 2 threaded pressure fitting and a flush
mounted sensor,sealed via an O-ring.
Compensated Temp Range -10 >
o o C to 80 >
o C Operating Temp Range -25 C to 120 >
o C Thermal Zero Shift <ѱ0.015% span / >
o C Thermal Span Shift <0.015% reading / >
o C Safe Over-range 1.5 x rated range minimum Burst Pressure 3 x rated range minimumFor 50 bar transmitter,burst pressure 2 x rated range Pressure Connection M24 x 2 Insulation Resistance >500M at 500Vdc,over the operable temperature range Load Driving 1k @ 28Vdc supply Environmental IP68 with submersible cable which has a strain wire and a vent tube for gauge format sensors Long Term Stability 0.1% / 12 months typical Wetted Materials 316L stainless steel,alumina ceramicPUR cable,ESP109 epoxy resin EMC Protection IEC 801 parts 2,3 & 4 >