STAIRCASE INFO0 pages

I N FO
CNC-technology at its best

Your PLUS in production
This machine provides three additional routing mo-

B R I E F

Highly efficient
staircase
production
by

VISION-II-ST Sprint

tors for your staircase production. These units are
mounted to the Y-slide and connected to the cardanic head. Each routing motor moves downwards
individually and possesses collet chucks.
As a standard, in staircase production a motor (9.0
kW) is used for shaping the outer contours of strings
and steps. Another motor (6.7 kW) processes the
slots and grooves at the steps and strings. The
design of the third routing motor (6.7 kW) with in-

D E S C R I P T I O N

lt Machine table with 7 beams; table size 6,200 x 1,400 mm
lt 2 x jigs for steps
lt 12 x double-acting vacuum clamps
lt 3 x jigs for newel posts
lt 7 x vacuum clamps; 3 x supporting beams
ltSpeed:
t

X = 60 m/min; Y = 60 m/min.; Z = 20 m/min

lt Displacement: X = 6,140 mm; Y = 1,600 mm; Z = 480 mm
lt Gantry passage 400 mm
lt 5-axes working unit with a power of 15 kW; 500 – 24,000 rpm

tegrated height tracing (float-mounted) permits the

lt Clamping unit; HSK-F63

manufacture of high-precision profiles at steps and

lt 3 x individually movable routing motors; 2 x 6.7 kW, 1 x 9.0 kW

strings. This conception allows for the main pro-

lt Height measuring by tracing ring

cesses in staircase production to be attributed to

lt Automatic plate magazine for 24 tools

several routing spindles.

lt Chip removal belt
lt Vacuum pump of 160 m3

Thus, tool changing time is minimised. The utili-

lt Vacuum accumulator of 250 liters

sation of the main routing motor at the cardanic

lt Vacuum distribution for alternate feeding

working head is limited to horizontal and freeform

lt Movable extraction system Ø 400 mm

processes, as well as to sawing processes at the

lt Safety at the machine via bumper

steps. Moreover, the tool changing system is still

moving along the X-axis next to the main routing

lt Siemens control system type Sinumerik 840D sl

motor. Compared to other solutions, in staircase

in a movable control panel with 17” TFT-monitor

production this machine conception provides for a

including tele-diagnostics

savings potential of about 20 % in production time

lt Laser projector for positioning the vacuum pods and the

caused by a reduction in tool changing time.

(no pressure sensitive mats required)

VISION-II-ST Sprint

components on the machine table

Rosenauer Straße 32 · D-96487 Dörfles-Esbach
Phone: +49 (0)9561-599-0 · Fax: +49 (0)9561-599-199
info@reichenbacher.de · www.reichenbacher.com

03/ 13

Reichenbacher Hamuel GmbH