Manual piston pump automatic siphoning: E10000 pages

> MANUAL PISTON POMP AUTOMATIC SIPHONING

MADE IN FRANCE

E1000 Manual piston pump automatic siphoning

APPLICATION :

For diesel fuel, light oil, antifreeze, cooling liquids, windscreen,...

FLOW RATE : 600 liters/h on standard rhythm

DESCRIPTION :

Full metallic pump, iron cast and steel, except:

- discharge tubing (flexible tubing 1,5 m + spout)

- and suction tubing (smooth tubing PVC 1 m length)

What makes its hardiness.

Its cast iron piston assembled without any seal avoids seizing

and any risks of failure after a long stop of the pump.

HOW TO MAKE THE AUTOMATIC SIPHON WORKING ON SECURITY :

After having introduced the spout in the empty container, start the pump by moving quickly the arm.

As soon as the pump is started, we are able to siphon automatically, by pulling thoroughly the arm near « A » position (at opposite

side of the discharge tubing). We must feel the stop after passing through the hard point.

By maintaining the arm fully in « A » position, the automatic siphoning continue.

Release the arm to stop siphoning.

The arm returns automatically on « B » position and siphoning stop immediately.

ATTENTION

It is possible that siphoning continue with little flow, if you let the discharging tubing in low position.

It occurs when something bother the valve (a piece of filings for example) and prevent it to come back to the good position on the

bearing of the piston.

For safety sake, you must, after using the pump, hook the spout on the plate as indicated on the above drawing.

POSSIBLE OPTIONS :

Pump equipped with a flexible plunger

Standard length : 1,6 m

Ref. :E1000AS

Single pump JAPYCHAUFF

Ref.: E1002

POMPES JAPY - Pare d'activites cfu Moulin - B.P. 15 - 25490 FESCHES-LE-CHATEL - FRANCE

Tel. +33 (0)3 81 9616 47 - Fax+33 (0)3 81 96 12 16 - www.pompes-japy.fr - We reserve the right to make modifications without prior notice.