عضویت 
ورود اعضا
راهنمای خرید
Pneumatic double diaphragm pumps, metallic/plastic 1'': PP1xx - AL1xx - INOX1xx0 pages
. AIR OPERATED DOUBLE DIAPHRAGM PUMPS, ™TALLIC
> AIR OPERMTtu I* ^m METALLIC orifices 1
Please contact us to check compatibility between accessories and pump materials with your fluid
COMPONENTS :
Body : PP, Aluminium, Stainless steel, PVDF (on request)
Diaphragms: PTFE, Hydrel Santoprene Buna N, Neoprene, Viton®, EPDM,...
SPECIFICATIONS AND ADVANTAGES :
Pumps adapted for the transfer or aggressive and/or viscous liquids. The plastic pumps
are recommended for strong acids, for bases. The metallic pumps have a good behav-
iour in solvents, hydrocarbons, ...
Self-priming at dry. The height of priming varies if the pump is dry or wet.
Variable flow rate through simple adjustment of the pressure and of the accepted air
flow (see accessories).
Tolerate dry running. The pump continues to work without warm up and without wear.
Dead heading : pumps stop without any risk of damage when the fluid discharge line is
fully closed.
CHARACTERISTICS :
Maximum flow rate : 100 l/min
Maximum pressure : 7 bar
Maximum dry suction head : 4,5 m
Maximum wet suction head : 7 m
Allowed particles: 4 mm
Consumption of air: 30 Nm3/h
Viscosity : 3000 cP (8000 cP with stainless steel balls)
Connecting air: 3/8"
The references AL1 PTFE et INOX1 PTFE are normalized
ATf:)C pumps (ATEX II2 GD IIB/IIC 95°C)
REFERENCES
PUMP BODY
DIAPHRAGMS BALLS
PP1HY
PP
Hytrel®
PTFE
PP1SAN
PP
PP1PTFE
AL1HY
PP
Aluminium
Santoprene® PTFE
PTFE PTFE
Hytrel® PTFE
AL1SAN
AL1PTFE-EX
INOX1PTFE-EX
Aluminium Santoprene® Acetal
Aluminium PTFE PTFE
Inox PTFE PTFE
INOX1 PTFE
RECOMMENDED APPLICATIONS
Lubricants, used oil, cooling liquid, liquid of transmission,
windscreen washer, cleaners_
Lubricants, used oil, cooling liquid, liquid of transmission,
windscreen washer, solvents_
Acids and basis
Lubricants, used oil, water
Lubricants, used oil, cooling liquid, water, windscreen
washer, brake fluid
ATEX pump for solvents (acetone, acetates, aldehydes),
ink, lacquers, paints_ _ _
Wide range of chemical compatibility. Recommended for
use with halogenated solvents.
6,5
6,5
7,2
7,2
7,2
7,2
POMPES JAPY - Pare d'activites du Moulin - B.P. 15 * 25490 FESCHES-LE-CHATEL - FRANCE
Tel. +33 (0)3 81 96 16 47 Fax +33 (0)3 81 96 12 16 * www. pom pes -japy.fr - We reserve the right to make modifications without prior notice.
"
