Silfill Conductive Adhesive0 pages

Our AS Shielding one-part conductive particle filled

silicone rubber adhesives are available using

standard silicone and fluorosilicone base

compounds combined with a selection of particle

fillers to produce a readily extrudable paste which

self-cures when exposed to atmospheric moisture.

Once the thixotropic paste is fully cured it provides

excellent adhesion and low volume resistivity.

SILFILL CONDUCTIVE ADHESIVE

AS Shielding

Applications:

AS filled silicone adhesives are generally employed as caulking

materials to fill voids, surface imperfections on mating surfaces or to

retain a conductive gasket in position during assembly. Most conduc-

tive gaskets depend on flat, accurate and clean mating surfaces to

provide a positive, low impedance bond and the additional use of

conductive adhesives should be avoided wherever possible.

Shelf life is up to sixteen weeks (30ml, 55ml) or six months (71 ml,

170ml, 310ml) if kept in the original packaging and stored in a dry

atmosphere below 23°C.

AS adhesives should be injected under pressure if possible, and, where

used as or with a gasket, should be retained under pressure whilst

curing. This enhances the conductivity of the compound. Care should

be taken when handling the compound as contact can irritate the skin

and eyes.

Specifications:

Standard base rubber is silicone.

How to order:

Specify: Series - Filler code - Tube size

Example:

AS-N-030 is a 30ml cartridge of nickel-graphite filled silicone adhesive

Notes:

Some filler types may be subject to minimum order quantities.

SERIES

AS=Silfill conductive adhesive

P&PTechnologyLtd

1-3 Finch Drive

Springwood Industrial Estate

Braintree CM7 2SF

T:+44(0) 1376 550525

www.p-p-t.co.uk

FILLER CODE

N=Nickel Graphite

J=Silver Aluminium

H=Silver Copper

TUBE SIZE

030= 30ml cartridge

055= 55ml cartridge

071 =71 ml cartridge

170= 170ml cartridge

310= 310ml cartridge