Conductive Adhesives0 pages
Our AS Shielding one-part conductive particle filled
silicone rubber adhesives are available using
standard silicone and fluorosilicone base
compounds combined with a selection of particle
fillers to produce a readily extrudable paste which
self-cures when exposed to atmospheric moisture.
Once the thixotropic paste is fully cured it provides
excellent adhesion and low volume resistivity.
SILFILL CONDUCTIVE ADHESIVE
AS Shielding
Applications:
AS filled silicone adhesives are generally employed as caulking
materials to fill voids, surface imperfections on mating surfaces or to
retain a conductive gasket in position during assembly. Most conduc-
tive gaskets depend on flat, accurate and clean mating surfaces to
provide a positive, low impedance bond and the additional use of
conductive adhesives should be avoided wherever possible.
Shelf life is up to sixteen weeks (30ml, 55ml) or six months (71 ml,
170ml, 310ml) if kept in the original packaging and stored in a dry
atmosphere below 23°C.
AS adhesives should be injected under pressure if possible, and, where
used as or with a gasket, should be retained under pressure whilst
curing. This enhances the conductivity of the compound. Care should
be taken when handling the compound as contact can irritate the skin
and eyes.
Specifications:
Standard base rubber is silicone.
How to order:
Specify: Series - Filler code - Tube size
Example:
AS-N-030 is a 30ml cartridge of nickel-graphite filled silicone adhesive
Notes:
Some filler types may be subject to minimum order quantities.
SERIES
AS=Silfill conductive adhesive
P&PTechnologyLtd
1-3 Finch Drive
Springwood Industrial Estate
Braintree CM7 2SF
T:+44(0) 1376 550525
www.p-p-t.co.uk
FILLER CODE
N=Nickel Graphite
J=Silver Aluminium
H=Silver Copper
TUBE SIZE
030= 30ml cartridge
055= 55ml cartridge
071 =71 ml cartridge
170= 170ml cartridge
310= 310ml cartridge
"