F205 Donut Loadcell0 pages

Donut Loadcell

Standard Ranges 100 and 200tonne (1000 and 2000kN) ♦ Hardened stainless steel body ♦ Very high structural load limit ♦ Standard 2 year warranty ♦ Tensile applications are fail-safeђ ♦ Flying lead or connector option Geometry: Axial strain cylinder in a sealed case, with raised end load bearing faces and hole right through. For use in compression or in fail-safe tensile applications. The F205 is ideally suited to engineering force measurements including through centre safety testing of cables, rods and bolts. It is designed for easy installation, usually between two flat faces bearing on its loading rings, either unattached or with retaining spigots positioned in the centre hole. Alternatively tensile load transfer can be achieved via a tie rod assembly through the centre hole. In this way the loadcell can indirectly measure tensile loads in a fail-safeӔ mode. We are happy to design variants of this loadcell to meet your specific requirements. Versions can be manufactured for operation up to +250C. Please consult our engineering department. Details of our other loadcell families can be found in the Loadcell Specifier Guide. If you require a copy please contact our sales department or look on our web site at www.novatechloadcells.co.uk. Ordering Codes: >
See the loadcell ordering code sheet for more details. Add range in the required units. F205CFR0K0 Compression, IP65, unrationalised Change the F to P for the connector option. size="-2">