5510/5516 Proximity Sensor Signal Conditioners0 pages

Proximity Sensor Signal Conditioners
PROXIMITY PRODUCTS
5510 (Radial Vibration) & 5516 (Position/Thrust)
Specifications
Features
Convert proximity transducer
system to a transmitter for
connection to a PLC or DCS.
Replace older monitor racks
incrementally at low cost.
• Easiest conversion of obsolete
monitor racks on the market today
• Powers Metrix drivers or Bently
Nevada Proximitors*
• Gives 4-20mA output proportional to
vibration or position
• Dynamic signal is available at the
signal conditioner or remotely
PC Series Input Power: 18-30 VDC,
60 mA
Probe Driver Power Provided:
-24VDC *
Input Signal: -8 mV/um (-200 mV/mil)
from a proximity probe driver
Frequency Response (5510):
5 Hz-10 KHz
Test Output (AC & DC): -8 mV/um
(-200 mV/mil), buffered
4-20 mA (Source) Output: Proportional
to shaft radial vibration (5510). 4-20
mA proportional to shaft axial position
(5516).
Sensor Malfunction: Output current
driven below 3.6 mA and LED indicates
either probe/cable not OK or probe gap
is outside the linear range.
Max. Load Resistance (Rl):
600 ohms
Max. Current Draw: 40 mA
Full Scale Output Range (20 mA): t
See How To Select.
Isolation: 500 V, circuit to case
Temperature Limits: -51oC to +100oC
Housing: Polymer internally coated for
EMI protection. 35 mm DIN-rail
available.
Electromagnetic Compatibility:
CE mark
*Note: Proximitor is a registered trademark of
Bently Nevada.
Weight & Dimensions
Weight:
0.5 kg (1.1 lb)
Height:
69.9 (2.75) max.
(with DIN-rail)
Dimensions
in mm [inches]
How To Select
1) Verify Probe Driver is -8 mV/um (-200 mV/mil) and note -VDC required. 24 Vdc is standard.
For 18 Vdc, add -18V to end of model number (see example).
2) Choose Model 5510 or 5516, desired 4-20 mA range and mounting style:
5510C - Radial Vibration
5510C -
A
0
1
0
1
0
0
0
0
1
1
2
2
5516C -
Example (-24 Vdc):
5510C- 001- 24V
Vibration Range (4-20 mA) / Mount
A
5516C - Position (Thrust) Vibration
= 0-5 mils (125 um), pk-pk/Base
= 0-5 mils (125 um), pk-pk/DIN-rail
= 0-10 mils (250 um), pk-pk/Base
= 0-10 mils (250 um), pk-pk/DIN-rail
A
Example ( -18 Vdc):
5516C- 001- 18V
Vibration Range (4-20 mA) / Mount
A
0
1
0
1
0
0
0
0
1
1
2
2
= ± 30 mils (± 750 um) Baseplate*
= ± 30 mils (± 750 um) DIN-rail*
= ± 40 mils (± 1000 um) Baseplate
= ± 40 mils (± 1000 um) DIN-rail
*not available with 18 Vdc option
1.26
www.metrixvibration.com • info@metrixvibration.com
Sales & Service Tel: 281-940-1802 • Fax: 713-559-9421 • 06/10