GCU-300 pages

GCU-30
Manual Key Start Genset Control Unit
Features
Microprocessor Based Design
Universal LED Graphic Interface, Displays Generator Status and
Failures
Modular Design, Quick Installation
Waterproof Front Panel With UV Protection
Charge Alternator Failure Protection
Two Push Button for Start and Pre-Heat
Three DIP Switches For Specification Setting
Suitable for Most Available Genset on The Rental Market

Specifications
DC Supply

9.0 to 36 VDC

Start Signal Output

1.2 Amp @ 12/24 VDC

Rated AC Input Voltage

5~500 VAC

Preheat Signal Output

1.2 Amp @ 12/24 VDC

AC Frequency

50/60 Hz

Charge Motor Excitation Signal Output

Fuel Solenoid Signal Output

1.2 Amp @ 12/24 VDC

Power Consumption

Environment

12/24 VDC

Under 3 watt

Physical Specification

Operating Temperature

-20~70 ℃

Panel Cut-Out

66.0 x 66.0 ±0.5 mm

Storage Temperature

-40~85 ℃

Dimensions

72.0 (L) x 72.0 (W) x 37.0 (H) mm

Relative Humidity

Maximum 90%

Weight

101 g ±2%

System Setting

Protection & Alarm Status Indicators

SW1

AC Frequency

ON50 Hz

OFF60 Hz

High Water Temperature Protection

SW2

Engine Stop Mode

ONEnergized to Start

OFFEnergized to Stop

Low Oil Pressure Protection

SW3

Engine Stop Timer Delay

ON20 sec.

OFF10 sec.

Engine Over speed Protection
Charge Alternator Failure Protection
User Define Protection

Mechanical Specifications

(Unit : mm )

TEL: +886-7-8121771
FAX: +886-7-8121775
Head Office: No.3, Lane 201, Chien Fu St., Chyan Jenn Dist., Kaohsiung, TAIWAN
Please link to http://www.kutai.com.tw for detailed manual.