عضویت 
ورود اعضا
راهنمای خرید
GCU-100 pages
GCU-10
Generator Control Unit
Features
Microprocessor based design
LED graphic interface, displays generator status and failures
Modular design, quick installation
Adjustable settings to enable it to work with any type of generating set
Waterproof front panel with UV protection
Provide IDLE control for Elec. governors
Five adjustable time delay potentiometers
Five DIP switches for specification setting
Protection & Alarm Status Indicators
Adjustable Timers
Start Failure
Overspeed
Engine Pre-Heat
2~30 Seconds
High Water Temp.
Underspeed
Starter Cranking Time
1~15 Seconds
Low Oil Pressure
Emergency Stop
Energize to STOP
1~30 Seconds
Low Battery Voltage
Extra Prog. Input
Engine Idle (Governor)
0~300 Seconds
Engine Cool-Down
0~300 Seconds
Specifications
DC Supply
9.0 to 36 VDC
Warm up Signal Output
5 Amp @ 12/24 VDC
Alternator Input Range
5~300 VAC 50/60 Hz
Accessory "ON" Output
5 Amp @ 12/24 VDC
Fuel Solenoid Signal Output
5 Amp @ 12/24 VDC
Idle Control Conductor Capacity
5 Amp @ 12/24 VDC
Start Signal Output
5 Amp @ 12/24 VDC
Power Consumption
Under 3 VA on Auto
Environment
Physical Specification
Operating Temperature
-20~70 ℃
Panel Cut-Out
66.0 x 66.0 ±0.5 mm
Relative Humidity
Maximum 90%
Dimensions
72.0 (L) x 72.0 (W) x 50.0 (H) mm
Weight
166 g ±2%
Mechanical Specifications
(Unit : mm)
TEL: +886-7-8121771
FAX: +886-7-8121775
Head Office: No.3, Lane 201, Chien Fu St., Chyan Jenn Dist., Kaohsiung, TAIWAN
Please link to http://www.kutai.com.tw for detailed manual.
