تماس با ما
وب سایت در حال به روز رسانی است. از شکیبایی شما سپاسگزار هستیم.

منابع یابی و خرید تجهیزات صنعتی

محصولات
محصولات
سازندگان
کاتالوگ
فیلم

 (ویژه صنایع و کارخانجات )

خدمات خرید ، حمل ، ثبت  سفارش ، ترخیص و تحویل هر گونه کالای صنعتی از اروپا ، چین ، ترکیه  و امارات متحده عربی
لطفا جهت خرید ، حمل ، ترخیص و تحویل هر گونه کالای صنعتی در هر نقطه از دنیا با ما در تماس باشید .
ایمیل sales@meshgad.com

تماس : ۸۸۸۷۱۸۰۸ - ۸۸۸۷۱۸۷۵ - ۸۸۶۵۶۴۷۱

  • 1
  • 2
  • 3
  • 4
  • 6
LOADING

MultiCut Pumps with external adjustable cutting system0 pages

نسخه متنی
"Submersible sewage pumps MultiCut Application nn

Submersible sewage pumps with cutting system MultiCutare used as non-moving appliances for backpressure pro-
tection of single buildings. They are suitable for pumpingdomestic waste waters with the usual additions (as speci-fied in DIN 1986 part 3).
For pumping from ducts that are connected to the public
sewer system ex-proof submersible pumps of the series
UFK have to be used. Due to the upstream cutting system
the pressure line manufactured in DN 40 - without cuttingsystem minimum DN 80 - can be routed parallel to the ter-rain.Operating conditions up to 40 C temperature of mate-rial to be pumpedSubmerged motor: Continuous operation (S1)
Emerged motor: Intermittant operation (S3) (eg. 35% = 3,5 min. operation, 6,5 min. pause)

UAK 08/2 MS >

nnThe MultiCut System nn

The liquid flows into the impeller through a rigid, perfora-ted cutter plate in which apertures are tapered to improve
the suction performance. The sharpened three bladed cut-
ter, rotating in front of the inlet, shears any solids present.The impeller then passes them through a counterflow system in the water plate, thence into the volute casing and out through the pump discharge.
The cutter plate rejects any material such as stones or metal that it is unable to cut. The combined cutting and
pumping system gives trouble-free,low-cost sewage dispo-
sal even with difficult ground conditions.

UFK 08/2 M The minimum flow velocity in the pressure piping must be 0,7 m/s according to EN 12056. This data is represented in the performance
curve as a limit of application. >

nnCutting system with agitator effect Pluggable cable joint
External adjustable cutting systemControllable oil chamber
SiC mechanical seal independent ofrotation directionMoisture sealed cable inlet
Built-in protection motor switch
Z-53.2-347 nn

(UFK)

We reserve the right to change specifications without notice. Pump performance is subject to ISO 9906 tolerances. >
D300-1.7E-0505V

nn

99

"

IRAN INDUSTRY EXPO

The largest online Industrial exhibition in Iran

 عضویت ورود   ENGLISH


اگر مجموعه شما جزو صنایع مادر و معظم در فیلد پالایشگاه ، پتروشیمی ، حفاری ، نیروگاه ، معادن و فلزات ، خودروسازی ، تولید مواد غذایی و.... می باشد لطفا درخواست خود را بر روی سربرگ به فاکس 88206264 و یا ایمیل enquiry@iranindustryexpo.com بنام شرکت مهندسی و بازرگانی مشگاد ارسال فرمایید.
اگر مجموعه شما جزو بنگاه های متوسط و کوچک در فیلد تولید ، بازرگانی ، مشاوره ، پیمانکاری ، دانشگاه ، پژوهشگاه ، توزیع ، فروشگاهی وکارگاهی می باشد ، پس از عضویت و با پرداخت هزینه ( به ازای هر درخواست معادل 50 یورو ) از خدمات زیر برخوردار خواهید شد :
  • پاسخ به پرسش های فنی و دریافت مشاوره از سازنده ، دریافت کاتالوگ و اطلاعات تکمیلی
  • دريافت پرفورما از شرکت سازنده
  • اطلاع از زمان تحويل و قيمت خالص كالا
  • اطلاع از هزينه هاي حمل و ترخيص و کارمزد تا تحويل كالا به انبار شما در هر نقطه از كشور
  • دریافت پیش فاکتوررسمی ( ارزی و یا ریالی ) به روش کارمزدی
*صدور پیش فاکتور رسمی فقط به نام شرکتهای ثبت شده که دارای کد بازرگانی معتبر باشند انجام پذیر است. در صورتیکه در حین مکاتبه با شرکت سازنده مشخص شود که دارای نماینده انحصاری و یا شعبه در ایران بوده و یا به به هر دلیل شرکت سازنده از فروش کالا به بازار ایران استنکاف نماید ارایه این سرویس متوقف و وجه دریافتی به حساب کاربر عودت می شود

ادامه