عضویت 
ورود اعضا
راهنمای خرید
Packaged sewage disposal units for single dwellings0 pages
81
Packaged Sewage Disposal Units
Application
compli 400
The compli 400 is the smallest of our packaged sewage
disposal units. It has been specifically designed for the
disposal of sewage from single dwellings. For easy
access and service it is installed on the ground of a basement
or in an accessible sump. The ready to connect
control unit is pre-wired with the pump and the level control.
An additional inlet is available for other waste water
discharge points such as shower, washing machine or
sink. The compli 400 consists of long lasting materials:
rust-proof steel for the shaft and polyethylene for the
50-l-tank.
compli 500
The compli 500 has been designed specifically for the
disposal of sewage from single dwellings with continued
sewage water inlet and for a larger tank volume. It is also
extremely easy to handle and installation requires a minimum
of space.
The PE-tank has accessible pipe connections and a particularly
simple „pinch“ type inlet flange for the connection
of pipe or bend. As all units, the maintenance is extremly
simple: the tank has a top mounted inspection opening
and, if necessary, the pumping unit can be removed/
replaced in minutes and without disturbing the tank
assembly.
compli 1000
The compli 1000 is one of our series of duplex package
sewage disposal units. It should be installed where additional
security for sewage disposal is demanded. In certain
cases the Local Authority will insist on duplicate systems
also on public applications such as restaurants, leisure centers
etc., duplex systems are always advised. The standard
package is complete with integrated swing-type check
valve, making the use of “Y” pieces on the discharge unnecessary.
compli 600/1200
The compli 1200 is provided with a large tank and has
specifically been designed for the disposal of sewage
from flats and industrial plants where sewage flow is continuous.
For ease of installation the unit is provided with
variable height inlet 560 to 700 mm. The control unit is
provided with mains dependent alarm and a volt-free
contact for collective fault signal. The compli 600 has the
same tank volume, but provided with a one-pump system.
compli 400
compli 500
compli 1200
compli 1000
D 206-1.6E-0505 V
