Model DSP-FCI SF6 Portable Dewpoint Analizer0 pages

Model DSP-FCI
Portable SF6 or Standard Dewpoint Analyser
Ranges available between -1100C to +200C (-1660F to +680F) Td.
The Model DSP-FCI is a fully self-contained portable
SF6 or Standard hygrometer from Alpha Moisture Systems
which will deliver the most dependable moisture
measurement in industrial and laboratory applications.
Designed with the operator in mind, Model DSP-FCI is
extremely easy to use and the digital dewSMART™
technology ensures accurate and reliable readings over
long periods with little or no maintenance. The incorporation
of stainless steel quick connect ttings, together with the
Desiccant Drydown Chamber, allows rapid measurements
which saves both time and cost.

Fully Portable - Rugged - Fast Response -

Measuring instrument
conforms with
EN 61326

Stable - Reliable - Accurate - Easy to set up.
Features
• Overall Range -110°C to +20°C Dewpoint
• Portable - Fully Self Contained
• Self-Diagnostics on Start-up
• Quick Connect SS Coupling
• Ordinary "C" Type batteries
• Sample ow control for inlet pressure
up to 20 barg

• Sample ow indication
• Excess of 250 Hours of continuous operation
• Desiccant Dry-Down Chamber for rapid
measurements
• Selectable engineering units in °C, °F, ppb(v),
ppm(v), ppm(w), g/m³ & lb/MMSCF

The Model DSP-FCI also incorporates an integral ow control valve which allows for high pressure samples
(up to 20barg) to be reduced to atmospheric pressure for introduction to the dessicant head assembly.
In addition the built in ow indicator with sample-specic graduation, provides ow control for air, SF6 or
any other gases.
Model DSP-FCI is available in a total of eight dierent ranges between -110°C to +20°C dewpoint, with the
display selectable in various engineering units:- °C, °F, ppm(v), ppb(v), ppm(w), g/m3 & lb/MMSCF. Parts
per million (weight) can be programmed for gases other than those pre-programmed (Air, Ar, H2, SF6, CO2
& N2) by simply inputting the molecular weight of the gas under test.
Full interchangeability of the dewSMART™ Sensor ensures guaranteed accuracy and reliability without
the need to return the whole unit back to base for calibration and setup.
The Model DSP-FCI is supplied ready for use with batteries installed, calibration certicate traceable to
National and International Humidity standards, two metres of stainless steel braided PTFE sampling hose,
instruction manual and an optional robust transit case or carry bag.

© Alpha Moisture Systems Ltd.

1 OF 3