Model SS-B Basic Dewpoint Sample System0 pages
Model SS-B
Basic Dewpoint Sample System
The Model SS-B is a simple yet a very eective design and
is easy to install. Manufactured by Alpha Moisture
Systems and sold around the world, this unit is a
popular choice for most industries needing a basic
solution for continuous dewpoint analysis in dry gases.
Low Cost Solution - Simple to Install and
set up - Compact Design
How it works is easy. Gas ow is connected from the isolation
valve to the inlet of the regulator shown here on the right of the
picture, gas ows from the outlet of the regulator then enters the
ow meter, that can then be adjusted from 0-5 lpm, from the
outlet of the ow meter it then enters the bottom of the
transmitter or sensor holder, as shown here, exiting at the top of
the holder and returning back to source or vented to atmosphere.
FEATURES
• Reduce inlet pressure from up to 210bar
(3,045PSI)
• Adust gas ow up to 5 litres per minute
• High grade components and
manufactured by us to CE standard.
• Strong pre-drilled 3mm hammer
coated mounting plate
• All high grade stainless steel components,
ttings and pipework with exception of
the ow meter which is nickel plated
brass
• Inlet and outlet tting available in 1/8”
1/4” and 6mm
• Wall mounted with 4 x 4mm
pre-drilled holes
The SS-B can be adapted (by addition of) a standard lter unit or coalescing type lter to the base unit if
required , please state at point of order. The SS-B is most suited for Alpha DS1200-AMT, DS1200-PDT and
DS2000 dewpoint hygrometers but can be adapted to suit most makes of hygrometers.
SPECIFICATIONS
MODEL SS-B
PRESSURE REGULATOR: up to 210bar (3,045 PSI)
OUTLET PRESSURE: Maximum 10bar (145 PSI)
FLOW METER: 0-5 litres per minute
SENSOR HOLDER: Stainless Steel
INLET / OUTLET FITTINGS AVAILABLE IN: 1/8”, 1/4” and 6mm tube
BACK PLATE DIMENSIONS (HxWxD): 260 x 160 x 3mm
MOUNTING HOLES: 4 x 4mm 10mm from edge.
WEIGHT: approx
See more Sample Systems and options at www.amsystems.co.uk
© 2012 Alpha Moisture Systems Ltd.
1 OF 2
"