TE leaflet0 pages

HAUG Kompressoren AG · Industriestrasse 6 · CH-9015 St. Gallen · Switzerland
Tel. +41 71 313 99 55 · Fax +41 71 313 99 50 · www.haug.ch · info@haug.ch
Piston-Compressors · High-Pressure Compressors · Gas-Compressors

COMPRESSORS

OIL-FREE COMPRESSORS
SERIES TE

F E AT U R E S

Series TE compressors function completely dry, i.e., with no cylinder lubrication
and no oil-bath in the crankcase, and are designed for continuous operation
under the most demanding conditions. Contamination of the compressed fluid
by lubricating oils is thus excluded.

• Oil-free, non-lubricated
reciprocating compressor

Our know-how in the field of special plant and systems engineering, combined
with our sophisticated modular system, make it possible to construct complex
systems meeting maximum quality and engineering standards and tailored
precisely to the customer's needs.
TE series compressors with magnetic couplings (Series TEG) are a Haug development suitable for continuous compression of gases with no leakage (leakage
rate <0.001 mbar l/s). Haug first incorporated this hermetically tight and
absolutely wear-free drive system into a compressor in 1989; it is suitable for
suction pressures up to 10 bar.
TE series compressors with shaft seals (Series TED) achieve gas tightnesses of
0.01 mbar l/s. This gastight variant is a rationally priced alternative for compression of gases. Maximum suction pressures for this system are restricted to
3 bar. Haug has been using this shaft-seal system for compressors for oil-free
compression of gases since 1978.
Repeated innovations and continuous refinement have made Haug TE series
gas compressors an absolute high-tech product that now provides the ideal
solution for safe, reliable and oil-free compression of gases in the 2.0 to 5.5 kW
power range.

• Long service life of all
components
• Air-cooled
• Magnetic coupling or shaft
seal
• Power range: 2.0 to 5.5 kW
• Speeds from 980 to 1450 rpm
• Delivery rate: 5 to 60 Nm3/h
• Delivery pressure: 2 to 80 bar
• Simple, low-cost operation
and maintenance
• Suitable for booster
applications
• Conforms with ATEX

A P P L I C AT I O N S
Process compressors for plant
engineering for the:
• Chemicals industry
• Pharmaceuticals industry
• Compression of medical gases
• Electronics industry
• Glass and steel industry
• Potable («drinking») water supplies
• Foodstuffs industry
• Beverages industry
• Research & Development
• Gas recovery
• Waste-water cleaning facilities
• Gas production and supply