Beamed Fiberglass Yarn for Filament Tape Reinforcement0 pages

No.
Date:
Supersedes:
Page:

CUSTOMER
ACCEPTANCE
STANDARD

TP-194
22-Nov-04
22-Jun-99
Page 1 of 2

BEAMED FIBERGLASS YARN FOR FILAMENT TAPE REINFORCEMENT

I.

DESCRIPTION
Beamed Fiberglass yarn is an accumulation of parallel ends pulled from a creel and wound
on flanged section beams.

II.

USE
These beams are used in the manufacturing of parallel reinforced tape products.

III.

AVAILABLE PRODUCTS AND NUMBER OF ENDS
Maximum Million End
Yards by Beam Number
Available Yarns

Beam Number

ECG75 1/0 620 0.7 Z, S or A
ECG150 1/0 646 0.7 Z, S or A
Table 1.
Beam
Type
9002
9004

Minimum
Ends
300
350

9002
22.5
46.0

Maximum
Ends
880
880

9004
26.6
53.2
Table 2.
Beam
Type
9002
9004

Available Ends

See Table 1
See Table 2

Minimum
Ends
300
350

Maximum
Ends
1090
880

The customer’s order shall specify the twist directions desires, “S’ or “Z” or alternately
spaced “S” and “Z” twists designated as “A”
NOTE:

To determine the available package for the ends and length required, the following
procedure shall be followed:

1.

Calculate the number of million end yards (MEY) by multiplying the required ends times the
required length. (Example 700 ends x 35000 yards=24500000 or 24.5 MEY

This specification is subject to change without notice.