عضویت 
ورود اعضا
راهنمای خرید
ATEX NICKEL PLATED MODULAR PROGRESSIVE DISTRIBUTOR SMO-SMX0 pages
CHA
RACTERISTICS
MODULAR PROGRESS IVEDISTRIBUTORSMO-SMX
ATEX NICKEL PLATED MODULAR PROGRESSIVE DISTRIBUTOR SMO-SMX
METERING ELEMENTS FOR THE EXACT BREAKDOWN OF OILS AND GREASE
■ SAE METRIC, BSP, NPTF
THREADS AVAILABLE
■ OPERATES UP TO 500 BAR
(7.200 PSI)
■ OPERATES WITH OIL OR
GREASE
■ ALL COMPONENT ARE
NICKEL-PLATED, HIGH
RESISTANCE TO CORROSION
■ CE AND ATEX MARKING
■ THE BASES ARE ALWAYS
SUPPLIED COMPLETE WITH
STANDARD 'O' RINGS AND
FIXING SCREWS
■ THE TWO OUTPUTS ARE
COMBINED BY REPLACING
THE ADAPTER. JUST TAKE
ONE ITEM OF STOCK
The modular system consists of two main
components: the base and the metering elements.
The modular progressive distributor is available in
two sizes: "SMO miniature" and "SMX standard".
Conventional bridging pieces are eliminated.
Bridging elements have been introduced and these
interconnect and discharge to the adjacent
element.
The distributor assembly principle enables factory
floor distributor assembly to accommodate
grouping of lubrication points.
The base assembly can be mounted and piped up without the metering elements. This provides
the most advantageous routing of pipe work and the elements can then be fitted to suit.
The system can be easily extended and the modular concept provides low cost replacement of
component.
OPERATION PRINCIPLE
AIR BLEED VALVES BUILT INTO
BASE
SECURE AND CONTROLLED
LUBRICATION
ASSEMBLING SIMPLE AND
FLEXIBLE WITH LOW
MAINTENANCE COSTS
ABILITY TO REPLACE THE
DOSE WITHOUT DETACHING
THE PIPES
APPLICATION
MACHINE TOOLS
TEXTILES
HEAVY INDUSTRY
Pump
Divider
PRIMARY LEVEL =^
Controller
L
SECOND LEVEL
Cycle Sensor
(Ultrasensor)
rf> A |T> *> rf>
Suction !-
PrE-fsurizEd Line —
NEUtral PrEfsure
_
Oi O O fli
tr> Ot O H>
Elemento dosatore
SMX 04
QOOOO
SMX 25
ooeoo
SMX. 25
ooeoo
SMX ,06
QOOOO
O
SMX .35
ooeoo
SMX .29
QOOOO
boooot
SMX. 65
QOOOO
SMX 65
Q060Q
1 SMX. 65
iQQOQCH
SMX. 65
QQQOO
0.08) 0-32
Portata in cc.
0
Elemento
dosatore ponte
s8s
!HI
o
s8s8°
S<D*(D
SoSO
0 0°
(0.08) (0.50)
The base assembly can be
mounted and piped up without
the metering elements. This
provides the most advantageous
routing of pipe work and the
elements can then be fitted to
suit.
The system can be easily extended
and the modular concept provides
low cost replacement of
component.
The SMX65 metering element (1)
pilots a block of 7 metering
elements SMX delivering
2.60cc./cycle.
The SMX65 metering element (3)
pilots a block of 4 metering
elements SMX delivering
1.3cc/cycle.
The SMX65metering
element(2)directly lubricates two
point of the machine.
The cycle is controlled by the
contact "X".
C2104PE WK 28/13
1/4
"
