DBE-500 0 pages
DBF.-500 SPECS > OVERVIEW The DBE-500 Evaporator is a short-throw (100 feet or 30 meters) unit, designed for simple and reliable opration in small areas. The DBE-500 is easy to use, easy to maintain, energy efficient and quiet an overall excellent value. FEATURES LOW PLUME HEIGHT for shorter drift distance, allowing longer op闩ration in swirling or changing winds. TEFLON* SPIRAL NOZZLES reduce fouling and clogging and provide for easy cleaning. MOBILE UNIT allows easy repositioning to take advantage of changing wind direction and speed. BENEFITS > MOBILITY: The DBE-500 Evaporator is designed to move easily around your site, allowing one operator to reposition the unit to take advantage of changing wind direction and speed. > SMALLER FOOTPRINT: The DBE-500 Evaporator is designed to throw-water droplets about 100 feet (30 meters) in calm conditions, allowing control of droplet drift within a smaller area and providing customers with an evaporator that can be used where larger machines cannot. > EXCELLENT PERFORMANCE: The high air velocity from our unique fan and barrel design combines with optimized water droplets to accelerate evaporation. Annual evaporation rates up to 75% have been achieved, with averages typically between 25 and 65%. Actual rates dpend upon many factors, including ambient temperature, relative humidity, water make-up and wind. > EASY TO MAINTAIN: Designed for easy cleaning and maintenance, with a fan motor developed for long life in wet conditions. Pre-lubricated, sealed bearings eliminate the need for weekly or monthly lubrication. > EXTREME DUTY: The DBE-500 design has evolved from 10 years of exprience in industrial and extr驪me outdoor applications. Critical components are manufactured from stainless steel for extended life in harsh environments. SPECIFICATIONS FAN AND HEAD SYSTEM > 7.5 HP world motor for 3-phase / 480 volt / 60 cycle and 3-phase / 400 volt / 50 cycle power (motors for other voltages available upon request). > Aluminum blades rotating at 1800 rpm (480 Volt / 60 cycle) or 1450 rpm (400 volt/50 cycle). MOUNT > 3-wheel painted or galvanized carriage. > Tow bar with wheel lock. > Hand jack to raise and lower angle of water plume. WATER SYSTEM > Stainless steel spray manifold. Designed for flow rate of 25 gpm (95 Ipm) at 100 psi (7 bar) water pressure. > Teflon® spiral nozzles. ELECTRICAL > 7.5 HP fan motor rotating at 1800 rpm (480 volt / 60 cycle) or 1450 rpm (400 volt/50 cycle). > Plastic control panel with start and stop buttons. > 150-foot (45 m) electrical cord. WARRANTY Full one-year warranty on ail parts and workmanship. OPTIONS > Oscillation available. > Y-line manual flush filter for dirtier water > High-volume nozzle configuration. > Longer electrical cord available without splices. DustControlTechnology* ^^1(800)707-22047tt&H-J!J30?[69^^7ww.driboss.com24HR Technical Support: (309)645-
"