DBE-7500 pages

dbe-750 specs > OVERVIEW The DBE-750 Evaporator is a floating unit, designed for effective opration in small areas, especially sites containing large particles or highly corrosive water. The DBE-750 Evaporator is durable, simple to use and easy to maintain a reliable way to manage excess water. FEATURES FLOATING UNIT supported by plastic pontoons containing closed-cell PU foam. LOW PLUME HEIGHT for shorter drift distance, allowing longer op闩ration in swirling or changing winds HEAVY INDUSTRIAL CONSTRUCTION, including stainless control panel, motor enclosure, manifold and fan blade for increased durability and lifespan. VIBRATION SENSOR included to shut down motor before catastrophic failure due to residue or ice build-up. STAINLESS STEEL SUBMERSIBLE PUMP attached to floating frame BENEFITS > LOW BUILDUP: The DBE-750 Evaporator is designed with a minimal amount of top surface area to control the build-up of residue or ice, helping to reduce clean up and maintenance. HIGH PERFORMANCE: High-speed fan blade rotation crtes an optimum water droplet distribution for evaporation. Annual evaporation rates up to 70% have been achieved, with average rates typically between 25 and 60%. Evaporation rates d颩pend upon many factors, including ambient temperature, relative humidity, water makeup and wind. EASY MAINTENANCE: This unit is designed for easy cleaning and maintenance. It requires no weekly bearing lubrication, as it is lubricated for the life of the motor. > MINIMAL CLOGGING: The DBE-750 Evaporator can pass particles up to 3/16 inch (4.7 mm) in diameter, which reduces the need for pre-filtering, filter cleaning and the hassles of clogged nozzles. > EXTREME DUTY: This design has evolved from 10 years of exprience in industrial and extrme outdoor applications. Polyethylene pontoons are filled with closed-cell polyurethane foam, ensuring bouyancy even after any accidentai puncturing of the plastic outer shell. Critical components are manufactured from stainless steel for extended life in harsh environments. SPECIFICATIONS FAN AND HEAD SYSTEM > 25 HP industrial-grade world motor for 3-phase / 480 volt / 60 cycle and 3-phase / 400 volt / 50 cycle power (motors for other voltages available upon request). > Stainless steel casing protects motor and enhances cooling. > Patented stainless steel fan blades (optional scale-resistant coating). > Vibration sensor for motor shut off. FLOATING PONTOON > Galvanized steel construction with stainless steel fasteners. > Plastic pontoon composed of UV-stabilized polyethylene shell with closed-cell polyurethane foam > 7.5 HP submersible stainless steel pump for 3 phase / 480 volt / 60 cycle power (specified for 80 gpm (303 Ipm) at 100 psi (7 bar). WATER SYSTEM > Standard flow, stainless steel water manifold for average evaporation conditions. Designed for flow rate of 66 gpm (250 Ipm) at 100 psi (7 bar) water pressure. ELECTRICAL > 25 HP premium efficiency fan motor rotating at 3600 rpm (480 volt / 60 cycle) or2900 rpm (400 volt/50 cycle). > Stainless steel control panel with start and stop buttons. > 150-foot (45 m) electrical cord. WARRANTY Full one-year warranty on ail parts and workmanship. OPTIONS > For acidic or high-alkaline water applications, stainless steel construction and acid-resistant coating. > Sp骩cial scale-resistant coating on fan to reduce residue build-up on blades. > 10 HP submersible stainless steel pump for 3 phase/ 400 volt/ 50 cycle. Optional high flow, stainless steel water manifold for above average evaporation conditions. Designed for flow rate of 91 gpm (344 Ipm) at 100 psi (7 bar) water pressure. > Y-line manual flush filter for dirtier water. DustControlTechnology* 1 (800) 707-2204 (U.S.) | +1 (309) 693-8600 (Int'l) www.driboss.com 24 HR Technical Support: (309) 645-3691