CFH-XXX Connector Fuse Holder0 pages

CFH-XXX Connector Fuse Holder

The Connector Fuse Holder (CFH-XXX) is a small easy-to-use power

distribution module which can hold up to four 280-footprint protective

devices. Designed to hold relays, circuit breakers, fuses, diodes, resistors,

and/or transorbs, the CFH-XXX is ready to support all of your small or last

minute power distribution requirements. Options include color of connector,

length of cover, and type of bracket. Tested to IP66 for ingress protection,

this product can be installed wherever required to eliminate excess wiring.

Specifications

Temperature Rating: -40°C TO +125°C

Material: Cover: 94V0 Clear polycarbonate

Connector: 94V0 Thermoplastic

Brackets: Side and end - zinc plated steel w/ chromate finish

Pin: Zytel FR7025 94V0 plastic

Servicable Parts: Cover: B151 -7184-S (Short) or B151 -7184-L (Long)

Brackets: B028-7013 (side bracket); B028-7015 (end

bracket); B028-7016 (pin bracket)

Max Amperage: The CFH is limited to a total of 100 amps maximum rating

when designed under SAE guidelines. A "Maximum

Amperage Guideline" diagram is shown below for

clarification, with the understanding that each application

should be verified prior to use.

Max Amperage Guidelines

Top

One 4-pin

relay

OR

Bottom

1 or 2 circuit

breakers;

max combined

rating = 30A

1 or 2 fuses;

max combined

rating = 60 A

1 or 2 circuit

breakers;

max combined

rating = 30A

1 or 2 fuses;

max combined

rating = 60 A

j r

Operate per SAE standard.

i.e. at 80% capacity-

BottorrV

Part Numbering System

Color

□

A - Black

B - Gray

C - Green

D - Blue

E - Yellow

F-Red

G - Orange

H - Brown

Cover Option

□

L - Long

S - Short

Bracket Option

□

S - Side

E - End

P - Pin

Notes

Terminals, seals, and plugs are not included. Connector uses

Delphi-Packard Metri-Pack 280 Series Metri-Pack sealed/Tang

style terminals, seals, and plugs.

52

Cooper Bussmann Transportation Products • Phone: 800.845.6269 • Fax: 503.692.9091 • www.cooperbussmann.com