IRL 600 Flexlifter 6000 pages

Robotics

IRL 600
Flexlifter 600: Programmable scissor-lift table

The FlexLifter IRL600 is designed to increase the robot
working envelope by adding
a programmable degree of
freedom to the Flextrack
IRT501-66 track motion.
It is possible to use the unit
to position a part tooling in
front of the process robots.
The unit can be used also
as a stand-alone module.
High performance
The FlexLifter IRL600 integrates a powerful and compact
servomotor equipped with a high quality gear, allowing high
accelerations & speeds.
Modularity
The FlexLifter IRL600 is one of the additional axis available for
FlexLean, ABB’s concept of modular BiW lines, see ABB BiW
Products Range brochure for more information. The Flexlifter
can be used also as a stand alone module.

Simple concept
The FlexLifter IRL600 is based on generic scissor lift table
concept. However the hydraulic actuator has been replaced
by an Electro-Mechanical Cylinder (EMC), to allow for fast
movements and high payloads without the constraints of
hydraulic actuators. Using a proven servomotor, the FlexLifter
is driven by IRC5 robot controller as a part of ABB robots
product range.
Ease of use
The upper plate of the lifter is adapted to material handling
applications. The lower plate of the lifter is designed to adapt
directly on FlexTrack IRT501-66 carriage.
The FlexLifter movements are programmed like a conventional
axis using the robot controller interface.