carbon steel ball valve 0 pages

ES-C-FBV-1

Job Name Job Location Engineer Approval

Contractor Approval Contractor's P.O. No. Representative

2-Piece, Full Port, Carbon Steel Ball Valves

Sizes: Vi" - 3" (8 - 80mm)

Series C-FBV-1 2-Piece, Full Port, Carbon Steel Ball Valves are suitable for a full range of liquids and gases. The C-FBV-1's full port orifice ensures maximum flow capacity, while reinforced PTFE seats, PTFE stem packing, thrust washer and body seal provide maximum safety and high operating pressure/temperature limits.

Features:

 Full port design

Օ Pressure rated at 1000psi (70 bars) WOG non-shock and 125psi (8.6 bars) WSP

 Adjustable stem packing

Օ Bottom loaded, blowout proof stem

 Drilled and tapped mounting pads

Օ PTFE stem packing, thrust washer and body seal

 Reinforced PTFE seat

Օ Vinyl insulator on heavy duty 304SS handles

 Low operating torque

Օ Each valve factory tested

 Standard Latch-Lok handle to lock in open or close position

Օ Conforms to MSS-SP-110 and API-598

Pressure - Temperature

Temperature Range: 0°F - 400°F (-18°C - 204°C)

Maximum Working Pressure: 1000psi (70 bars) WOG non-shock; 125psi (8.6 bars) WSP

Specifications

A 2-piece full port carbon steel ball valve to be installed as indicated on the plans. The valve must have an adjustable stem packing, reinforced PTFE seats, PTFE stem packing, thrust washer and body seal. Pressure rating no less than 1000psi (70 bars) WOG non-shock, 125psi (8.6 bars) WSP. Valve must conform to MSS-SP-110. Valve shall be a Watts Regulator Company Series C-FBV-1.

USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.wattsreg.com Canada: 5435 North Service Rd., Burlington, ONT L7L 5H7; www.wattscanada.ca

Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.