Series 150A0 pages
ES-150A
For Residential Applications
Job Name –––––––––––––––––––––––––––––––––––––––––––– t
Contractor –––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––– t
Approval ––––––––––––––––––––––––––––––––––––––––––––––
Engineer –––––––––––––––––––––––––––––––––––––––––––––– t
Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval –––––––––––––––––––––––––––––––––––––––––––––– t
Representative –––––––––––––––––––––––––––––––––––––––––
Series 150A
Water Hammer Arrestors
Sizes: 1/2" and 3/4" (15 and 20mm)
For residential/domestic water system applications, only.
What is Water Hammer?
The noise from banging pipes is caused by shocks of high speed
water flowing in the pipe when a fixture is suddenly closed. Sudden stoppage causes a “bounceback” of the water and is called
water hammer. It might be compared to driving your car at slow
speed into a wall where the effect is negligible. However, if you
drove the car at a much higher speed, the impact would be greater, and consequently, so would the bounceback or shock.
Dishwashers, clothes washers, quick-closing faucets all contribute to creating water hammer which is not only annoying but
damaging to pipes and appliances. The simple, economical solution is Watts Series 150A designed with a pre-charged air chamber and a rugged sealed-in diaphragm which flexes to absorb the
shock. It can be installed vertically, horizontally or at any angle.
Model 150A
Features
•tPre-charged air chamber
Model 150A-HA
•tSealed in diaphragm
•tComplete stainless steel chamber construction
•tRechargeable
Pressure — Temperature
For residential/domestic water systems only.
Not for commercial applications.
Maximum working pressure: 150 psi (10.3 bar)
Maximum temperature: 180°F (82°C)
Maximum velocity: 10 ft/sec. (305 cm/sec.)
Maximum shock pressure: 200 psi (13.8)
10 cu. inch (164 cu. cm) total volume.
Weight: 12 oz. (9.6 gm)
MODEL NO.
ORDERING CODE
SIZE
WATER HAMMER ARRESTOR (only)
150A
/"
0269503
1 2
FITTING only for / " SHOCK ARRESTOR for WASHING MACHINES with / " hose thread
connection
1 2
150-HA
3 4
0269505
/ " HT
3 4
WATER HAMMER ARRESTOR and FITTING with 3/4" hose thread connection for
washing machines
150A-HA
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
0269508
/ " HT
3 4