Glovebox and Containment Hood0 pages
GLOVEBOX & CONTAINMENT HOOD
ICP — OES INSTRUMENTS
from Leeman Labs
INTRODUCTION
ENCLOSURE ICP INSTRUMENT DESCRIPTION
Whether you are handling radioactive material,
biohazards or ultra high purity chemicals, a controlled
atmosphere may be essential for your application, and
your safety.
Leeman Labs Enclosure ICP-OES systems
provide the same high level of analytical
performance as our standard instruments, but
are designed specifically to accept a containment envelope (glovebox, fume hood, clean
microenvironment, etc.). Some of the principal
design features of these systems include:
At Leeman Labs, we offer a wide variety of containment
options for our family of ICP – OES products. Whether
you require an ICP interfaced to a plutonium standard
glovebox or a HEPA filtered laminar flow hood, Leeman
Labs has the products, knowledge and experience
needed to provide you with a truly exceptional solution.
ICP – OES PRODUCTS
For over 20 years Leeman Labs has been a leading
innovator in Echelle-based ICP-OES instruments.
Modern Echelle spectrometers provide very high
optical resolution, low limits of detection and excellent
dynamic measurement range; in a space efficient bench
top package.
In an effort to provide analytical solutions to the widest
range of elemental analysis challenges, Leeman Labs
offers both Array detector and PMT based ICP
instrumentation. Our latest simultaneous ICP instrument,
the Prodigyhigh dispersion ICP, brings together a state-of-theart, large format, programmable array detector (L-PAD)
with an advance high dispersion Echelle spectrometer to
provide unexcelled analytical performance. This
configuration allows the user to access any wavelength,
or group of wavelengths, or to capture the full
spectrum for any analyses. Our latest PMT
based ICP the Profilehigh dispersion ICP, offers the
,
highest dispersion of any commercially
available ICP and as a result is ideally suited
to analysis involving complex sample
matricies. Both Prodigy and Profile feature
many of the conveniences that we’ve come
to expect from Leeman ICP’s – such as full
automation, Axial, Radial and Dual Viewing
options, long-life 40 MHz RF generators and
remote diagnostic capabilities.
• Isolation electronics – all electronics are
isolated from the contained environment to
facilitate service access
• Interface – a custom enclosure interface
provides a hermetic seal between sample
introduction area and the analyzer.
• Failsafe Interlock system – safety is always a
prime concern for sites involved in the
analysis of potentially hazardous samples.
Leeman ICP provide hardware (not software)
based interlocks to protect the instrument
and the user from a wide variety of failure
modes including, loss of cooling water, argon
flow, RF power, etc.
6 Wentworth Drive • Hudson, NH 03051
1- 800-LEEMANS • 603.886.8400 • FAX 603.886.9141