P350 Pin Insertion Machine0 pages
P350 Pin Insertion Machine Fast Facts Insertion rates up to 5 per second at 0.2 in [5.08 mm] pitch. Օ Up to 3 different products can be applied in one machine. Apply products at up to 7 different angles. Օ Active anvil for PCB support, insertion verification and force monitoring. Windows based touch screen interface. Օ Quick change tooling packs allow production flexibility. Able to process any manu-facturer's reeled through-hole or press-fit products. Օ Range of options including PCB vision system and board thickness measurement. SMEMA interface The P350 is a fully automatic pin insertion machine capable of applying reeled prodխucts from TE or other manufacturers. With inline operation, an automatic tool changer and insertion rates up to 5 per second, it is focused at fully automatic high speed operation to maximize through put while minimizing costly scrap. A servo powered XY table positions the PCB under a central drive station at high speed. The automatic tool changer can hold up to 3 insertion heads each capable of applying a different product. A unique rotary insertion finger allows the application of products at up to 7 different angles without rotating the PCB. This allows the P350 to apply product at different angles without a reduction in insertion rate or the potential positioning error associated with PCB rotation. An active lower anvil proͭvides support to the PCB during insertion, can provide special actions such as clinch-ing (when applicable) and allows for real-time force monitoring for 100% quality assurance on press-fit applications. Finally, icon driven software with touch screen provides a simple to use and intuitive operator interface. The P350 provides a wide range of soluͭtions for pin insertion applications. Board size capacity up to 17.5" x 17.5" [450x450 mm], quick change tooling packs, and a wide range of options make it a flexible high speed platform. High speed servo drives for insertion rates up to 5 cycles per second at 0.2 in [5.08 mm] pitch. Օ Automatic tool changer to apply up to 3 different products on one machine. Rotary insertion finger can apply prodխucts at up to 7 different angles without rotating PCB. Real time insertion force monitoring for 100% quality assurance on press-fit applications. Օ Able to process any manufacturera reeled through-hole or press-fit products. Wide range of optional equipment to meet specific customer and application requirements. connectivity
"