Hydraulic Crimp Tooling - 10,000 psi-rated Tools with Industry-standard U-Dies, Also Available with Portable, Powered Pumps0 pages
Hydraulic Crimp Tooling Fast Facts Standard 10,000 psi [68,950 kPa] rated hydraulic pumps and heads Օ Interchangeable TE-design U-dies for crimp force up to 14 tons [125 kN] U-die stroke options of 1 in [25 mm] and 1.5 in [38 mm] Օ Termination range varies by product type Integrated head/die for crimping #8-2 AWG [7-34 mm2] SOLISTRAND terminals Օ Heads compatible with shank-dies available for larger wires requiring crimp force greater than 14 tons [125 kN] Portable power, using a hand-held tool with rechargeable battery, or a Portable Battery Hydraulic Unit for standard crimping system Օ Electric & manual hydraulic pumps for crimping at fixed locations Produced under a Quality Management System certified to ISO 9001. A certificate copy is available upon request. 10,000 psi-rated Tools with Industry-standard U-Dies, Also Available with Portable, Powered Pumps TE Connectivity continues the tradition of quality crimping tools with a line of industry-standard 10,000 psi [68,950 kPa] hydraulic compression crimp heads, pumps, and interchangeխable U-dies. A battery-powered pump and tool options provide unprecedented portability for any crimping application. The U-dies are well suited for applications requiring a crimp force of up to 14 tons [125 kN]. For wire sizes requiring more than 14 tons [125 kN], TE offers five heavy-duty crimp head configurations that are compatible with shank dies. There are four light-duty crimp head options, including three in the U-die format. U-dies are available in two types, with 1 in [25 mm] and 1.5 in [38 mm] stroke, respectively. The two 12 ton [101 kN] head options have 1 in [25 mm] stroke. The 14 ton [125 kN] head is for larger products that call for a 1.5 in [38 mm] stroke. Also available is an integrated head/die for crimping #8 to #2 SOLISTRAND terminals. The heavy-duty heads are availͭable in five diffrent configurations. Note: These heads are not compatible with 8,200 psi [56,540 kPa] tooling. The basic 10,000 psi hydraulic tool system requires a pump, hose (multiple lengths are available with all configurations), crimp head, and crimp die. There is a TE hydraulic pump to meet the demands of any crimping application. For maximum portability, the hand-held crimping tool with rechargeable bat-tery is an effective solution. Or, to power a standard crimping system at any location, order the Portable Battery Hydraulic Unit. For fixed crimping locations, you can choose between a 110 V or 220 V Electric Hydraulic Pump (with optional remote hand control), or manual foot and hand hydraulic pumps. U-Die Line up, including #8-#2 SOLISTRAND head, for 10,000 psi [68,950 kPa] systems providing up to 14 tons [125 kN] of crimp force Shank-Die Line up, for wiring sizes requiring more than 14 tons [125 kN] of crimp force Heavy-Duty Crimp Head (U-Die). connectivity
"