7014 and 7010 Series, Float Switches0 pages

DREXELBROOK

®

A Leader In Level Measurement Solutions

7014 and 7010 Series
Float Switches

B/W Floats are available in a variety
of materials for use in many different
process liquids.
7014 Unifloat™ Specifications
Output:
Type C or Type I Reed switch
(Type I for direct connection to PLC or DCS)
Material of Construction:
316SS (Brass optional)
Number of switch points:
Up to 12
Maximum Length of guide tube:

Economical level switch

The B/W 7014 and 7010 float switch products
offer an economical solution to clean liquid point
level measurement.

Multiple switch points

The B/W float switches offer single point or up to
12 switch points on a single guide tube.

Direct or Indirect operation

Up to 12 feet
Operating Temperature:
0 to 250 degrees F
Operating Pressure:
Vacuum to 14,7 psi

7010 Tilt Switch Specifications

Switches can close on rising level or open on
rising level

Output:

Suitable for many Applications

Material of Construction:

Applicable to clean liquids for high or low level
indication, pump control, and stop fill on storage
vessels.
Reliable mechanical point level switches for use
in many clean liquids applications. Float switches
provide general-purpose point level device at an
economical price. Simple installation and reliable
operation make floats a good choice for many
point level applications.
B/W float switches provide reed switch or
mechanical switch outputs that can connected to
B/W relay Modules for control function or directly
to a PLC or DCS system. Relays are available for
general purpose and with intrinsically safe outputs
for hazardous areas.

Mercury switch or mechanical S.P.D.T.
Polypropylene
Number of switch points:
One
Maximum Length of tether cord:
20 feet standard (longer length available)
Operating Temperature:
32 to 160 degrees F
Operating Pressure:
Vacuum to 26 psi