EGX-200 pages
Desktop Engraver EGX-20 SPECIFICATIONS
Table size | 220 (W) x 170 (D) mm (8-5/8 (W) x 6-11/16 (D) In.) |
Table load weight | Maximum 1 kg (2.2 1b.) |
Carriage cutting range | 203.2 (X) x 152.4 (Y)x31.8(Z) mm {8 (X) x 6 (Y) x 1-1/4 (Z) In.) |
Carriage operating speed | X and Y axes: 0.1 to 1 mm/s, 1 to 15 mm/s (0.0039 to 0.59 in Js) Z axis: 0.1 to 1 mm/s, 1 to 6 mm/s (0.0039 to 0.23 \nJs) |
Cutting-depth control | AST (Active Surface Tracking) system |
Maximum cutting depth | 3D Cutting mode: 0.05 to 7 mm (0.002 to 0.27 In.) Engraving mode: 0.05 to 1 mm (0.002 to 0.039 in.) |
Cuttable materials | Composition: Resin (acrylic, modeling wax, ABS, polyacetal, polycarbonate, styrenefoam, etc.), wood, and plaster Maximum thickness: 30 mm (1-1/8 in.) |
Resolution | 0.01 mm/step (0.00039 In./step) |
Spindle motor | 12W(DC motor) |
Spindle rotating speed | 4,000 to 15,000 rpm |
Cutter diameter | 3.175 mm (1/8 in.) |
Interlace* | Parallel (compliant with IEEE 1284) |
Power supply | AC adapter Input: AC 100 to 240 V ±10%, 50760 Hz Output: DC 19 V, 2.1 A |
Power consumption | Maximum during operation: 0.6 A at 100 V, 0.27 A at 240 V |
Operating noise level | Standby: Less than 45 dB (A) No-load operation: Less than 70 dB (A) (according to ISO 7779) |
External dimensions | 515.2 (W) x 368.3 (D) x 270.6 (H) mm (20-5/16 (W) x 14-1/2 (D) x 10-5/8 (H) In.) |
Machine weight | 10.9 kg (241b.) |
Operating environment | Temperature: 5 to 40 °C (41 to 104 °F) Relative humidity: 35 to 80% (no condensation) |
Included Items and accessories | AC adapter, power cord, cutter, cutter holder, depth regulator nose.adheslve sheet for mounting material, test-use plate material, hexagonal screwdriver, hexagonal wrenches (large and small),Roland Software Package CD-ROM, User's Manual |
I Available Options
dia- shank diameter, L-overall length, W - blade width, unit - mm
Model No. | Description | |
3.175 (1/8) cutters lor general engraving on acrylic and resin material | ||
ZEC-A2013 | Cemented carbide dia - 3.175,114(L) x 0.127(W) | v |
ZEC-A2025 | Cemented carbide dia = 3.175,114(L) x 0.254(W) | |
ZEC-A2051 | Cemented carbide dia - 3.175,114(L) x 0.508(W) | |
ZEC-A2076 | Cemented carbide dia = 3.175,114(L) x 0.762(W) | |
Parallel cutters for engraving large characters (not Intended for deep engraving) on acrylic and resin material | ||
ZEC-A2150 | Cemented carbide dia - 3.175,114(L) x 1.52(W) | |
ZEC-A2190 | Cemented carbide dia = 3.175,114(L) x 1.91 (W) | |
ZEC-A2230 | Cemented carbide dia = 3.175,114(L) x 2.29(W) | |
ZEC-A2320 | Cemented carbide dia - 3.175,114(L) x 3.175(W) | |
Quarter round cutters for engraving acrylic and resin material with high speed | ||
ZEC-A2013-QR | Cemented carbide dia - 3.175,114(L) x 0.13(W) | '1 |
ZEC-A2025-QR | Cemented carbide dia = 3.175,114(L) x 0.25(W) | |
Diamond scraper for scribing names and numbers on aluminum or brass | ||
ZDC-A200O | dia = 3.175,127(L). Burnishing attachment (ZB-20) is required. | 0 |
Description
Burnishing attachment
ZB-20
Diamond scraper (ZDC-A2000) is required.
Adhesive eheet lor securing engraving material
AS-10
210 mm x 140 mm (8-1/4 In. x 5-1/2 In.), 10 sheets
Replacement spindle motor
ZM-12
Tests conducted by Roland DG Corporation resulted In
motor life of approximately 1000 hours.
Replacement spindle
ZS-20
Interlace Cable
SX-UP2
1 8mm parallel to USB conversion cable
Roland reserves the right to make changes In specifications, materials or accessories without notice. Your actual output may vary. For optimum output quality, periodic maintenance to crtBcal components may be required. Please contact your Roland
dealer for details. No guarantee or warranty Is Implied other than expressly stated. Roland shall not be liable for any Incidental or consequential damaa.es, whether foreseeable or not, caused by defects In such products.
Reproduction or use of copyrighted material Is governed by local, national, and International laws. Customers are responsible for observlnn all applicable laws and are liable for any Infringement.
All trademarks are me property of their respective owners. Roland DG Corp- has licensed the MMP technology from the TPL Group.
Roland
AUTHORIZED DEALER:
Printed in Japan. RD&9019414 APR HE-1 C-S
www.rolanddg.com
maeine.
Roland
DESKTOP ENGRAVER
Simply Brilliant
"