CYLINDERS SERIES 1319 ÷ 13210 pages
Series 1319-1321
nnnnCylinders according to standard
nnnnISO 15552 - VDMA 24562
nnnnGeneral
nnnnThis series of pneumatic cylinders is manufactured according to ISO 6431 standards adapted to VDMA 24562
nnnnand CNOMO/AFNOR 49003 that guarantee the interchangeability of the cylinders even without mounted
nnnnanchoring.
nnnnIt differs from the 1300 and 1303 series mainly due to the different pitch of the mounting holes on the end plates
nnnnand of the barrel made of anodized and shaped aluminium; the tie rods have been eliminated for bores from 32
nnnnto 125 mm and the end covers are mounted directly on the barrel with special male/female screws, while for
nnnnbore 160 and 200 mm it is still used the tie rods going through the barrel fixing holes.
nnnnThe barrel is extruded on the inside to guarantee precision with low friction; oxydation hardens the sliding
nnnnsurface of the seals allowing work even without lubrication.
nnnnThe magnetic piston can be mounted to activate the limit switch with Reed contact and all types of anchorings
nnnnare available according to ISO-VDMA standards, that can be fixed to the end plates with socket head screws.
nnnnTo order single acting cylinders (up to 0 125, 50 mm maximum stroke), add to the code of the chosen cylinder
nnnnabréviation MA forthe front spring and MPforthe rear spring.
nnnnFor example: 1320.32.50.01 MA
nnnn1320.50.25.01 MP
nnnnConstruction characteristics
nnnnEnd plates
nnnnRod
nnnnfrom 032 to 0125: UNI 5079 aluminium alloy casting painted black bycataphoresis
nnnnfrom 0160 to 0200: UNI 3051 aluminium chilled painted black bycataphoresis
nnnnChromed AISI303 stainless steel or C43 chromed steel
nnnnBarrel
nnnnAluminium alloy, anodized 25 micron Ra = 0,3H-0,5
nnnnCushion bushings
nnnnHardened aluminium
nnnnRod-guide bushing
nnnnSelf-lubricating sintered bronze
nnnnPiston Vulcanized NBR 80 shore rubber monobloc on steel core with
nnnnincorporated plastoferrite permanent magnet. NBR 80 shore
nnnnrubber monobloc on without magnet for the non magnetic version
nnnnplus rear spacer
nnnnVITON® monobloc for high temperature, available on request
nnnnfor magnetic and non magnetic cylinder
nnnnPiston rod and
nnnncushion seals
nnnnSelf-lubricating 90 shore mixing polyurethane
nnnn(VITON® on request for high temperature)
nnnnOther seals
nnnnRubberNBR80 shore
nnnnCushion adjustment screws Nickel-plated steel
nnnnTechnical characteristics
nnnnFluid
nnnnfiltered and preferably lubricated air
nnnnPressure
nnnn10 bar
nnnnOperating temperature
nnnn-5°CH-+70oC(VITON®, 150°C)
nnnnBore
nnnnCushioning length
nnnn0 32 - 40 - 50 - 63
nnnnmm 28 - 32 - 32 - 40
nnnn80_ - 100 - 125 - 160 - 200
nnnn44 - 50 - 55 - 55 - 55
nnnn"Attention: Dry air must be used for application below Q°C"
nnnnStandard strokes (for all diameters) Stroke tollerance (ISO 15552)
nnnnfrom 0 up to150, every 25 mm
nnnnover 150 up to 500, every 50 mm
nnnnover 500 up to 1000, every 100 mm
nnnnBore | Stroke | Tollerance |
32 - 40 - 50 | up to 500 | +2 0 |
over 500 up to 1250 | +3,2 0 | |
63 -80 - 100 | up to 500 | +2,5 0 |
over 500 up to 1250 | +4 0 | |
125 - 160-200 | up to 500 | +4 0 |
over 500 up to 1250 | +5 0 |