PICOUP-EXP-350I0 pages
®
PICOUP -EXP-350I
APPLICATION :
Issued on
Oct. 01-2009
DUAL STAGE TOOL FOR CAT
Approvals SMaart EDF n° AE/RE/2004/001
- PRICKING a cable to check and ensure the absence of tension on LV and MV underground cables
before cutting them.
2
Capacity on cables with flat or round armoured steel wire : 3 x 300 mm
2
MV to NFC 33226: 3 x 240 mm for copper cables.
- CUTTING After this picking operation the so deenergized cable may then be safely cut.
HYDRAULIC CABLE PRICKING AND
CUTTING TOOL
Ref : PCCH350 I (dual stage).
composed of :
a dual-stage hydraulic jack.
an handle that helps to position and hold the tool on
the cable.
a heat treated steel cutting blade
a cradle to centre the tool on the cable
a gauge to check th shape of the pike
Integrated hydraulic pump pressure 750 bars
CUTTING CAPACITY : cable O.D. : 120 mm.
Maximum section Copper 3 x 300 mm2
Dimensions L x l x H : 780 x 210 x 330 mm.
Weight : 14 kg.
3 mètres
CASE REMOTE CONTROL with radio code
(fréquency 433,92 Mhz)
Réf. : PCCH240I-BT-CSF
- The case remote control is connected to the pricking and
cutting tool with an electrical wire of 3 meters long.
- 1 Flash indicates the stand-by of the case remote control.
- 1 Siren indicates the good accomplishment of the operation
and the end of it.
- The tool is working thanks to the battery connected on this
case.
WIRELESS hand case with 2 buttons (433,92 Mhz)
Réf. : PCCH240:38
- is working with a 9 V battery.
- radio code - can be used up to 25 meters.
CARRYING CASE
This case contain all necessary parts to work on a C.A.T. :
- Flexible braid and earthing rod.
- 2 batteries 12 Volts 3 Ah. Nimh
- 1 hour fast charger .
- Wrench to install an other steel pike and to disconnect the
earthing flexible braid.
- 1 spare pike.
- 2 straps each 2m. long for securing in tunnels and trenches.
- Protective undercarpet 0,7 m x 1m.
non contractual document
276, rue de la Roche Brune
38430 MOIRANS FRANCE
Tél.00 (33)476 355 188 - Fax: 00(33)476 355 183
ventes.outillage@mos-industrie.com
www.mos-industrie.com