PICOUP-EXP-240I0 pages

Issued on
Oct 15 - 2002
rev. Sept - 06 - 2007
ind - B

®

PICOUP -EXP-240-I
APPLICATION :

Patented material / Agreement for use of EDF's SMaRT N° AE/RE/2004/001

- PRICKING cables to check and ensure the absence of tension on LV / MV underground cables
before cutting them
LV to HN 33 S 32 and S 33 Districables up to and including 3*240 mm² alu + 1*95 mm² alu
MV to NFC 33320 and C33223: 3*240 mm² and 1*630 mm²( single phase )
MV to NFC 33226: 3*240 mm² for copper cables
Old cables according to NFC 33100 and cables with armoured steel wire.
NEW All copper cables according to Standard NFC33-226

- CUTTING After the pricking operation the so deenergized cable may then be safely cut.
HYDRAULIC PRICKING AND CUTTING TOOL
Ref. : PCCH240-ISF
Made of:
- hydraulic jack
- a case that helps the tool to be installed on the cable
- a cutting blade + a pike in treated steel to make the
pricking and cutting operations on the cable
- a cradle to centre the tool on the cable
-a gauge to check the shape of the pike
- an integrated hydraulic pump (700 bars)
- U motor = integrated 12 V,
CUTTING CAPACITY: diameter of 90 mm
Weight: 12 Kg

CASE REMOTE CONTROL with radio code
(fréquency 433,92 Mhz)
Ref. : PCCH240I-BT-CSF
- The case remote control is connected to the pricking
and cutting tool with an electrical wire of 3 long
- 1 Flash indicates the stand-by of the case remote
control
- 1 Siren indicates the good accomplishment of the
operation and the end of it
- The tool is working thanks to the battery connected on
this case

Wireless hand case with 2 buttons (433,92 Mhz)
Ref. : PCCH240:38
- is working with a 9 V battery
- radio-code - can be used up to 25 meters

non contractual document

276, rue de la Roche Brune
38430 MOIRANS FRANCE
Tél.00 (33)476 355 188 - Fax: 00(33)476 355 183
ventes.outillage@mos-industrie.com

www.mos-industrie.com