The Warrior Cable®0 pages
The Warrior Cable
The Warrior Cable
1
®
Rugged, Cost-effective RF Cable Assemblies –
When Down-time is Not an Option
The Warrior cable, with internally armored GrooveTube® technology, is a field proven design having seen reliable
operation in modern combat zones. The cable will provide long term repeatable performance in the extreme operating conditions associated with electronic countermeasures, electronic warfare and multiple types of field deployed
communication systems. In addition to withstanding rugged field handling it provides lasting stability under vibration
and flexure, and features excellent shielding effectiveness to avoid conflict with adjacent signals. Warrior cables are
also employed in commercial factories where tough handling or other factory conditions demand dependable long
term performance. These cables offer many commercial benefits in rugged test and measurement applications where
failures can lead to costly and untimely consequences.
Electrical Data
Cable Construction
Maximum Frequency:t
520:t
50.0 GHz
tt
539:t
12.4 GHz
Impedance: t50 Ω nominal
Propagation Velocity:t
69% nominal
Time Delay:t
1.47 ns/ft (4.82 ns/m)
Shielding Effectiveness:t
-110 dB minimum (cable only)
Dielectric Withstanding Voltage:t
520:t
10 kV at 60 Hz
tt
539:t
15 kV at 60 Hz
Capacitance:t
29.0 pF/ft ( 95.1 pF/m)
Inner Conductor:t
Dielectric: t
Outer Conductor: t
Standard Finish: t
tt
t
Mechanical Data
Available Connectors
Finished Outer Diameter:t
tt
520:t
539:t
0.330 in (0.838 cm)
0.485 in (1.232 cm)
Static Bend Radius: t
tt
520:t
539:t
1.5 in (3.81 cm)
3.0 in (7.62 cm)
Weight with Standard Jacket/Armor:t
tt
520:t
539:t
0.05 lbs/ft (0.067 kg/m)
0.10 lbs/ft (0.149 kg/m)
Crush Resistance: t
250 lbs/linear in (44.6 kg/linear cm)
Operating Temp. Range: t
tt
-67 to 275° F (-55 to 135° C)
Above 185º F (85º C) use “T” designation
Solid Ag-plated Cu
PTFE Tape
GrooveTube® Cu
Neoprene over
Metallic Braid
(a wide variety of other protective finishes
and armors available)
tt
520:t
t
t
539:t
1.85 mm, 2.4 mm, 2.9mm, 3.5mm,
7mm, 7-16 DIN, BNC, SMA, TNC,
Type N, ZMA, ZN
7-16 DIN, SMA, TNC, Type N
(maximum frequency dependent on cable;
other connectors available)
Additional Information
All Warrior cable assemblies are tested
100% for S-Parameters and each assembly
is serialized. Standard test data includes
VSWR and insertion loss. Additional testing
options will be quoted upon request. Full
traceability is available for each cable assembly.
122 Banner Road
Stroudsburg, PA 18360-6433 USA
+1(570) 424-8400
Solutions@MegaPhase.com | www.MegaPhase.com