Oil Separators0 pages
OIL SEPARATOR-RESERVOIRS
The function of a Helical Oil Separator-Reservoir is to remove and
store oil from the discharge gas so that it can be returned to the
Compressor.
Applications
Helical Oil Separator-Reservoirs can be used in a variety of applications.
Common applications include multi-compressor racks. Helical Oil SeparatorReservoirs are intended for High Pressure Oil Management Systems.
These products are designed for use with scroll and reciprocating type
compressors. They are not recommended for screw or rotary vane
compressors. Henry Technologies’ Oil Separators are suitable for use with
HCFC and HFC refrigerants, and their associated oils, as well as other
industrial fluids non-corrosive to steel, copper and Teflon.
How it works
The Helical Separator does not rely on any moving parts for oil separation.
As the oil laden hot gas enters the separator it is directed in a spiral motion
around a helical flighting. The centrifugal forces act on the gas/oil mixture
causing heavier oil particles to spin to the perimeter where they impact an
internal screen. The screen layer functions as both an oil stripping and
draining medium. Separated oil flows downward along the boundary of the
shell through a baffle and into an oil collection chamber. The specially
engineered baffle isolates the oil collection chamber and eliminates oil reentrapment by preventing turbulence. The virtually oil free refrigerant gas
then exits through a screen fitting just below the lower edge of the helical
flighting. Oil Separator-Reservoirs do not have an oil float assembly. Instead,
a dip tube is located in the oil chamber that feeds oil to the compressor
through a High Pressure Oil Management System.
Main Features
Ÿ
*Patented Henry Technologies Design
Ÿ
ODS refrigerant connections
Ÿ
SAE flare Rotalock valve oil connection
Ÿ
High oil separation efficiency - up to 99%
Ÿ
Low pressure drop
Ÿ
Integrated oil reservoir
Technical Specifications
Maximum working pressure = 450 PSI (31 Bar)
Allowable operating temperature = +15°F to +300°F (-10°C to +149°C)
Oil Separators are UL and C-UL Listed by Underwriters Laboratories, Inc.
Henry Technologies’ Oil Separators are designed and registered for use in
Canada. Please contact Technical Support at 1-800-627-5148 for CRN
details and list of approved provinces and territories.
Materials of Construction
The main components; shell, end caps and connections are made from
carbon steel.
COMPRESSOR PROTECTIVE DEVICES
Installation - Notes
44
Full instructions are given in the Product Instruction Sheet, included with
each Oil Separator-Reservoir.
Selection Guidelines
Henry Technologies' Oil Separator-Reservoirs rely on adequate gas
velocities to allow for oil extraction from the hot gas so sizing according to the
DCFM rating is important. The Oil Separator-Reservoir DCFM Rating table
shows the min/max ratings allowed for sufficient separation and low pressure
drop. When sized correctly the Oil Separator-Reservoir models will separate
up to 99% of the oil from the hot gas. Please contact Technical Support at 1800-627-5148 for assistance or recommendations when selecting Oil
Separators.
CRN
Visit our website: www.henrytech.com