Ball Valves0 pages
BALL VALVES
The function of a Ball Valve is to provide isolation in liquid and gas
applications with single or bi-directional flow where little restriction
is desired.
Applications
Ball valves are used in a wide variety of refrigeration and air conditioning
applications. They can be used for both liquid and gas applications. This
type of valve is commonly used for isolating purposes. 937 series ball valves
are suitable for use with HCFC and HFC refrigerants and their associated
oils, as well as other industrial fluids non-corrosive to brass, steel, copper,
Teflon and synthetic rubber.
Main Features
Construction features
Ÿ
Bi-directional flow
Ÿ
ODS connections
Indicator on stem shows valve position - open or closed
Ÿ
Fully opened or closed with quarter turn of stem
Ÿ
Positive stem stop ensures precise positioning in the open or closed
Ÿ
position
Blow-out proof stem
Ÿ
Ball
Ÿ cavity vented to prevent over-pressure
Schrader valve included
Ÿ
Mounting pad
Ÿ
CRN
Installation - Notes
1.The valve body must be protected against excessive heat during
installation, to prevent damage to the seals.
2. Full instructions are given in the Product Instruction Sheet, included
with each valve.
Sealing integrity features
Premium quality PTFE ball seals
Ÿ
Double O-ring stem seal design
Ÿ
Premium quality neoprene stem O-ring seals
Ÿ
Neoprene cap seal - acts as a secondary seal
Ÿ
Œ Mounting Pad
Schrader Fitting
Technical Specifications
Maximum working pressure = 700 PSI (48.3 Bar)
Allowable operating temperature = -40°F to +250°F (-40°C to -121°C)
Henry Technologies’ 937 Series Ball Valves are UL and C-UL Listed by
Underwriters Laboratories, Inc. Valves 1-3/8 and larger are CE marked in
accordance with PED. Additionally, the Ball Valves are designed and
registered for use in Canada. Please contact Technical Support at 1-800627-5148 for CRN details and list of approved provinces and territories.
2
C
ODS
B
D
Materials of Construction
1
The components: valve body, valve body adaptor, ball and seal cap are
made from brass. The stem is made from plated steel. The pipe extensions
are made from copper. The ball seals are made from virgin PTFE, stem
O-rings and cap seal from neoprene.
FLOW CONTROLS
Part No
8
ODS (inch)
A
1/4
6.50
937202
3/8
937203
6.50
1/2
6.50
937204
6.50
937205
5/8
7/8
937307
7.24
937409
1 1/8
8.50
937511
1 3/8
9.25
937613
1 5/8
10.00
937617
2 1/8
11.42
937721*
2 5/8
12.87
937725*
3 1/8
14.37
*Reduced Port - Full Port models available upon request
Visit our website: www.henrytech.com
Dimensions (inch)
B
C
2.15
0.63
0.63
2.15
0.63
2.15
0.63
2.15
0.83
2.63
1.00
2.97
1.22
3.73
1.54
4.24
1.87
5.26
1.87
5.26
2.36
6.06
A
D
0.31
0.31
0.39
0.51
0.79
0.94
0.98
1.10
1.38
1.50
1.69
Port Size (inch)
Cv
Weight (lbs)
0.50
0.50
0.50
0.50
0.75
1.00
1.25
1.50
2.00
2.00
2.50
2.09
2.44
6.01
15.1
42.0
82.5
142.2
220.8
438.9
224.5
373.2
0.75
0.75
0.77
0.77
1.46
2.14
3.48
5.56
10.14
11.35
19.38