Uninterruptible Power Supply

The 1D1000B30C Uninterruptible Power Supply (UPS) provides a
high quality output of 115v 60hz 1φ @ 1000VA from an input of
115v 50/60hz. The integral valve regulated lead acid battery will
support the output for 30 minutes in the event of an input supply
failure.
The UPS is built into a fabricated steel container and is designed to
be deck mounted on ‘U’-bar using the fixing holes provided.
Access for maintenance and repair is from the front via a hinged
cover that opens to the left.
Louvers pressed outwards from the front, sides & rear of the
assembly, provide for fan assisted cooling during normal operation,
and natural convection when the Anti Condensation Heaters are
operating.

1D1000B30C

Electrical connections to and from the UPS are made via the
top mounted removable gland plate,
The UPS can be provided with a battery monitoring option that
continuously monitors the state of the batteries. An alarm is raised if
there is a battery imbalance (due to a short circuit cell) or if there is a
hydrogen concentration of >1%.
The 115V 60hz output is of high quality and is achieved by using a
crystal controlled linear inverter with feedback loops that enable the
control board to respond rapidly and smoothly to the demands of the
output circuits. Closed loop operation reduces line and load
regulation of the UPS output.
The built in battery charger will recharge a depleted battery to 80%
charge in 8 hours.