EMV-10000 pages
FLOW-TTOffiC
TECHNICAL SPECIFICATIONS
EMV-1000™
EMV-1000™ SHEA
EMV-1000™ SHE B
Electromagnetic Velocity
Open Channel Flowmeter Sensor
The EMV-1000™ is an ATEX certified water/wastewater
electromagnetic velocity open channel flowmeter
sensor which is available in two sizes:
• SIZE A is suited for pipes or channels from 150 mm
to 500 mm diameter
• SIZE B is suited for pipes or channels from 500 mm
to 2.000 mm diameter
The sensor is encapsulated in an IP68 submersible ultra
high molecular polyethylene body to be mounted with
a special sensor mounting band in the pipe.
When combined with the appropriate level sensor, the
EMV-1000™ constitutes an efficient electromagnetic
area/velocity flowmeter measuring both velocity and
level in the same cross-section (or slice of pipe). This is a
requirement necessary for accurate flow rate
measurement using the continuity equation: Q = v x A
In addition, electromagnetic sensors are totally
unaffected by the concentration of debris or dilution of
wastewater by rain.
Velocity Measurement
Method Electromagnetic (Faraday's Law)
Range 0 to +6 m/s
Accuracy ± 1% of measured value or ±0,03 m/s
(whatever value is bigger)
Min. conductivity of the medium needed
Velocity Measurement Method
10|jS/cm
The principle of magnetic-inductive flow measurements utilizes
the Faraday's law, where a conductor moving in a magnetic
field induces a voltage of amplitude proportional to the
velocity of the conductor. The conductor is the media being
measured.
Material & Dimensions
Material Ultra High Molecular Polyethylene (PE-UHM)
Stainless steel 316 electrodes
Protection rate IP68
Dimensions Size A: 165 mm L, 40 mm W, 25 mm H
Size B: 190 mm L, 60 mm W, 45 mm H
Weight Size A: 0,300 Kg (without cable)
Size B : 0,750 Kg (without cable)
Operating Temperature Range and Pressure
0° to 80°C (depending on pressure)
Max. pressure 4 bar (depending on temperature)
Certification
For ATEX Zone 1: N2G EEx ib m IIC T6 following ATEx 100a
Sensor Cable
Material Polyurethane jacketed
Length 10 m (standard)
20 m, 30 m or length up to 50 m (optional)
Converter for EMV-500™ (included)
Operating temp.
Protection rate
Power supply
Output
Max. impedance
-10° to +50°C
IP66
18...36 VDC
One 4...20 mA analog output for
velocity (m/s) to be connected to a
PLC or the UNI-TRANS™ for flow
conversion
500 Ohm
ISO9001
CERTIFIED
VINCOTTE
Specifications are subject to change without notice
Updated: 11/04/2013
Rue J.H.Cool 19a B-484
Fax.: +32 (0)87 899790
FLOW-TTOniC^
B-4840 Welkenraedt Belgium
39790 info@flow-tronic.com
Tel.:+32 (0)87 899799
www, flow-tronic.com
"