AVI-MAG0 pages
AVI-Mag™
Full Pipe Electromagnetic Flow Meter Technical Specifications
The AVI-Mag™ is a hot tap full profile electromagnetic insertion
flow meter. Multiple electrodes placed across the entire sensor
body at equal area, measure and report the average flow rate
over the full diameter of pipe. The specific design of the multi-
electrode sensor compensates for variable flow profiles, including
swirl and turbulent condition.
The AVI-Mag™ can be installed without shutting down, emptying or
cutting the pipe (hot tap installation). It does not require welding
flanges and installation can be done in pressurized pipelines up to
16 bar.
Cost of installation is largely reduced by eliminating the need for
heavy equipment (cranes, etc.) or extensive manpower. The AVI-
Mag™ is the most economical flow metering solution for medium
and large pipe sensor sizes, reducing drastically installation costs.
The AVI-Mag™ fits in confined spaces, can be submerged and
offers complete accessibility. It can be removed in pipes under
pressure for easy inspection, cleaning, calibrating or verification. It
is particularly cost-effective for retrofit application.
The AVI-Mag™ comes in 2 different sizes in order to be used with
1 inch or 2 inch ball valves. The 1 inch AVI-Mag™ is available for
pipe sizes ranging from DN100 up to DN1500. The 2 inch AVI-
Mag™ is available for pipe sizes ranging from DN500 up to
DN2500. For larger pipe sizes, please contact FLOW-TRONIC.
Velocity Measurement
Method Electromagnetic
Range 0 to +6 m/s (depending from pipe size and
maximum velocity)
Accuracy ±0,5% of reading ± zero stability
Zero Stability ±0,009 m/s (for range: 0,1 m/s to 6 m/s)
Linearity 0,3%
Repeatability 0,2% of range
Has reverse flow sensing capability
Application
AVI-Mag™ 1"
AVI-Mag™ 2"
From DN100toDN1500
From DN500 to DN2500
Conductivity
Minimum conductivity of 5 umho/cm
Power requirements
AC 90 to 265 VAC at 45/65 Hz (20W/25VA)
DC 10 to 13 VDC or
DC 18 to 63 VDC
AC or DC must be specified at time ordering
Materials
Sensor body Coated metallic material (approved for food
industry)
Insertion hardware 316 stainless steel
Compression seal silicone rubber
Sensor electrodes graphite
Outputs
Analog Galvanically insolated and fully programmaf
for zero and full scale (4-20mA)
Output capability < 20V (1000 ohm, 4-20mA)
Display
2 programmable displays
Real-time display: indicates flow & velocity
Totalizer display: user selectable units
Pulse/Frequency One frequency/pulse output for flow rate or
for external totalizer.
Capable of sinking < 250 mA at < 35 V2 m
of reading
Environmental
Fluid temperature -10°C to +60°C at 16 bar
Protection rate IP68 (sensor is submersible)
FLOW-TTOIliC
www. flow-Iron ic. com
Specifications are subject to change without notice
Updated: October 2014
RueJ.H. Cool 19a I B-4840 Welkenraedt I BELGIUM
Tel.: +32 (0)87 899 799 I Fax: +32 (0)87 899 790
E-mail: info@flow-tronic.com
"