Crimping Tools0 pages
Page 1
Work faster, neater and more reliably
with the new Fabco-Air bench mounted
and portable pneumatic crimping tools
More than a crimping tool
The new Fabco-Air 300 Series of pneumatic power
tools is designed to perform numerous manufacturing
functions, improving product quality and increasing
productivity on the production line. Now
you can tackle a variety of assembly applications
with confidence.Typical applications for Fabco-Air
crimping tools include:
4 Making plumbing assemblies
4 Splicing wire rope and cable assemblies
4 Crimping electrical terminals and connectors
4 Swaging mechanical fasteners
4 Staking, punching, piercing and flaring
subassembly components
4 Sealing, embossing and notching assemblies
4 Special clamping and holding assemblies
4 Special custom applications
Principle of Operation
The patented Fabco-Air Multi-Power® cylinder
uses multiple pistons attached to a common
shaft. Each piston is isolated within its own
chamber by means of baffles integral with the
outer cylinder wall. Special internal porting
through the rod allows air pressure to simultaneously
energize all pistons to produce over
1700 pounds force directly to the cam and
power head. Force is increased through the
cam and jaws to approximately 4000 pounds
at 1” away from the tool and approximately
2500 lbs at a 2” distance.
The cut-away view illustrates the concept.
Baffles are indicated with red arrows; power
stroke air path is shown with yellow arrows.
Quick-change jaws
reduce set up time
New Product Bulletin
#FCT-JY07
Bench mounted tool
Fabco-Air, Inc. n 3716 N.E. 49th Avenue n Gainesville, FL 32609-1699
11-18-09