HSL Series0 pages
High Intensity Spotlights
HSL Series
Long working distance, wash down high-intensity focused spotlight
Condensed illumination is produced even at 2 m using unique illumination structure.
A spot light solution for your long working distance, focused, and washdown requirements
Conventional spot light sources
LED light sources
Have short lifetimes resulting in a higher cost of goods to
replace bulbs and significant cost due to downtime and
maintenance over the long run duration.
Have high power consumption increasing long term energy
costs and environmental impact.
High surface temperatures that can burn a bare hand.
Non-uniform intensity over the illuminated area.
Require filters to achieve desired color content which must be
replaced frequently and block a significant fraction of the
light power.
Have the longest lifetime minimizing downtime and operating costs.
Do not fail immediately but rather decrease in maximum reachable
brightness over long period of time.
Consume very little power thus minimizing electricity costs and
environmental impact.
Generate relatively little heat and can be safely handled even at full
intensity.
Provides illumination with a high intensity uniformity and minimal
variation with time.
Color comes from the LED itself and is available in red, white,
green, and blue.
Washdown (IP67 compliant)* Construction enables use the most
demanding environments with water, dust, or other contaminants.
* IP67 specifies proper function with immersion in 1-m of water for a period of 30 minutes.
High-intensity, uniform, condensed illumination in
only the areas required
Minimal light loss ensures efficient light use.
The HSL Series High-intensity LED Spotlights achieve high-intensity condensed illumination in areas requiring illumination up to 2 m
away. Furthermore, the HSL Series spotlights have a high degree of uniformity in illumination area to enable performing both camera
photography and visual inspections.
[HSL Series Luminosity of red, white, green, and blue light]
White light (HSL-58SW-D300)
Blue light (HSL-58BL-D300)
Green light (HSL-58GR-D300)
Luminosity
Uniformity of red, white, green, and blue light]
200 lx
Luminosity
Green
Blue
350 lx
450
*
or more
Luminosity
100 lx
*
or more
Luminosity
300 lx
*
or more
350
300
250
Uniformity within
Ø200-mm area:
50% or better*
200
150
100
50
0
-150
59
White
400
or more
2,000mm
* Maximum light intensity within the Ø300-mm diameter spot when it is
illuminated with a 2,000 mm working distance from the front of the light.
(The light intensity may vary with ambient temperatures.)
Red
500
*
Luminosity (lx)
Red light (HSL-58RD-D300)
[HSL Series -
-100
-50
0
50
100
150
Distance (mm)
* Light intensity value across the Ø300-mm spot diameter when it is illuminated with
a 2,000 mm working distance from the front of the light.