LFV2 Series0 pages
Coaxial Lights Line Lights with Coaxial System
LFV/LFV2 Series
LNV Series
Even illumination on reflective object surfaces
Bright, even illumination across the entire field of view makes on-axis illumination systems
ideally suited for inspecting mirror-finish work for scratches etc.
LFV2-5 Series
LFV/LFV2/LFV2-CP Series
LFV2-5 Series.
The micro lens and illumination system
are combined in one unit, making the
system much easier to use than a
separate illumination system combined
with a standard f50 lens.
The field of view can be adjusted by
changing the macro lens on the lens
barrel.
LFV2 / LFV2-CP Series Features
The use of CCS's unique heat dissipating construction
minimizes temperature increases due to the heat
generation in LEDs, increasing the service life of the LED.
(Refer to page 103.)
LFV/LFV2-CP Series Features
The use of a half mirror with an anti-reflection coating
eliminates ghost images.
The viewing window is protected with optical glass,
preventing dust entry.
Coaxial lights with a lens mounting ring
are available. These lights can be
mounted directly to the threaded part of
the lens commonly used for mounting a
filter and are best suited for installation
in confined places. (Available in M25.5,
M27, and M30.5 models.)
LFV-34-M27
LNV-300
LFV2-5-5
Example of installation
*The camera is not a CCS product.
Magnification / Field of View
Magnification
LFV2-5-2 LFV2-5-5 LFV2-5-12
The LNV-300 provides coaxial drop illmination for line
sensors. Chip LEDs are used to achieve ultra-even
illumination.
BGA Alignment Mark Inspection
L
2.4 X
-
WD
1/3 inch sensor
1/2 inch sensor
28mm or less Field of View: 1.5mm Field of View: 2mm
1.1 X
0mm 45mm or less Field of View: 3.2mm Field of View: 4.2mm
3X
70mm 23mm or less Field of View: 1.2mm Field of View: 1.6mm
1X
0mm 22mm or less Field of View: 3.5mm Field of View: 4.6mm
0.4 X
20mm 53mm or less Field of View: 9.3mm Field of View:12.2mm
Illumination structure of LFV2-100
Examples of Coaxial Light Images
A half mirror aligns the diffused light from the
LED array to the same optical axis as the lens.
Inspecting for Bearing Face Damage
Bearing Periphery Inspection
Even small scratches are made
clearly visible, using an on-axis
illumination system.
With standard coaxial illumination,
the light is concentrated at the center
of the illumination area.
With the LNV-300, even lumination
is achived over a wide area.
Light used: LFV2-70RD
Light used: LFV2-50RD
Light used: LNV-300
Heat dissipating construction
Half mirror
Camera
Illumination system
This model
Heat dissipation material
LED
Object
45
"