EG20000 pages
EG2000
Electronic Engine Governor Controller
with Smoke Limiting, & Idle Speed. Works with Built-in & Non-Built-in PTs
Pumps, also can be used with Low Current, Electric over Hydraulic Oil Pumps
Type Governor Actuators
Features
Works on a wide ranges of MPU/flywheel frequencies
15 Amp max. output
Suitable for all types of diesel and gas engines
High sensitivity and stable at low frequency variations
Moisture, vibration, and rust protected, epoxy encapsulated electronics
For use with isochronous generators & automatic paralleling PLC controls
Idle speed adjustment and connections for a remote speed POT
Specifications
Operating Voltage
10 - 30 Vdc
Temp. Stability
Output Current
From 0.5 Amp to 15 Amp
Remote Speed Adjustment Range (2 mode)
Frequency Range
600 - 9500 Hz (MPU signal)
Idle Speed Frequency
Adjustable from 30-85% of normal
Speed Band
+/- 0.25% at steady state
Environment
Between -40 - +85 °C better than +/- 0.5%
Adjustable range +/- 5% with 5K ohms potentiometer
Ramp Time
3 - 20 seconds (Adjustable)
DIP Switch Description
Operation Temperature
-40 - +85 °C
SW1
ON
600 - 1200 Hz
Storage Temperature
-40 - +85 °C
SW2
ON
1200 - 2500 Hz
Relative Humidity
Max. 95%
SW3
ON
2500 - 5000 Hz
Vibration
3Gs @ 100 - 2K Hz
SW4
ON
5000 - 9500 Hz
Droop rate adjustment
RAMP-TIME
Soft start adjustment
Governor Controls
DROOP
GAIN
ACT output gain adjustment
SPEED
Speed adjustment
INT.
Engine stability adjustment
IDLE
Idle speed adjustment
Mechanical Specifications
Physical Specification
Dimensions
Weight
DROOP
INT.
GAIN
147.0 (L) x 114.0 (W) x 50.0 (H) mm
690 g +/- 2%
RAMP-TIME
SW
POWER : DC12/24V
SW1-ON 600~1200HZ
SW2-ON 1200~2500HZ
SW3-ON 2500~5000HZ
SW4-ON 5000~9500HZ
IDLE SPEED
REMOTE
SPEED POT
+
1
IDLE
2
3
5
RUN SPEED
~
ILS
ACT
4
6
7
8
9
10 MPU 11
TEL : +886-7-8121771
FAX : +886-7-8121775
Headquarters : No.3, Lane 201, Chien Fu St., Chyan Jenn Dist., Kaohsiung 80664, TAIWAN
Please link to http://www.kutai.com.tw for detailed manual.